Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Need help with aftermarket seats (http://www.the370z.com/exterior-interior/55406-need-help-aftermarket-seats.html)

gomer_110 05-28-2012 08:40 AM

Need help with aftermarket seats
 
I think I'm more lost now that I've read over the various seat threads. Basically I'm looking for a set of seats to use in conjunction with a 4/maybe 5 point harness for running AutoX events and still retain the stock belts for street driving.

From what I've gathered Bride, Recaro, and Status are the preferred brands but there all pretty f-ing expensive. Also I might have problems getting my fat arse in some of them comfortably. And of course height could be an issue too since with a helmet on I just barely miss the roof in the stock seats.

Important info: I'm 6'1" ~215lbs 34" waist

Any recommendations on seats would be helpful. Preferably $1k per seat with hardware or less.

sfearl1 05-28-2012 09:20 AM

These look nice...

http://www.the370z.com/parts-sale-pr...-brackets.html

Edit: I just saw your size... those might not work since OP is also 6'1"

sfearl1 05-28-2012 11:08 AM

I just found these. They seem to be popular with the NSX crowd...

R1 Carbon Kevlar

Amuse370z 05-28-2012 05:51 PM

Quote:

Originally Posted by sfearl1 (Post 1741442)
I just found these. They seem to be popular with the NSX crowd...

R1 Carbon Kevlar

Basically replica Bride Stradia IIs?

sfearl1 05-28-2012 05:52 PM

Quote:

Originally Posted by Amuse370z (Post 1741863)
Basically replica Bride Stradia IIs?

Idk, someone mentioned on the NSX board they were GIAS Low Max II reps..

edit: just searched the Stradia, it looks almost identical to the GIAS?

Amuse370z 05-28-2012 06:00 PM

Yes, those are the Gias, the bolsters are higher on the Gias than the Stradia.

reldas 05-28-2012 08:37 PM

the Corbeau vx1000 seats are old now, i think there are VX2000 now.

gomer_110 05-28-2012 08:47 PM

Just wondering how time consuming/difficult is it to switch out the seats? Just thinking that maybe just going with a non-reclining seat and then in the rare event that I make a long road trip (ZDayZ, etc) I'll just throw the stock Nismo seats back in for the trip. Am I crazy with this idea or is it feasible?

martin82 05-28-2012 09:23 PM

Removing the stock seats only takes about 5 mins!! There are 4 bolts, u will need to move the seat forward and backwards to remove each sides bolt, then unplug the airbag wire usually a yellow connector (if you have touring seats) unplug the power seats and heated seats harness.

Huckleberry 05-28-2012 09:53 PM

Quote:

Originally Posted by sfearl1 (Post 1741311)
These look nice...

http://www.the370z.com/parts-sale-pr...-brackets.html

Edit: I just saw your size... those might not work since OP is also 6'1"

dude is 300lbs, while the op is 215.

i say have at it.

gomer_110 05-29-2012 01:26 PM

Currently leaning towards either the Bride Vios III or the Bride Zeta III L. Anyone have any experience with either of these? Also do either one or both allow for a 5-point harness? Only thing that concerns me is that I saw some reviews online that say the Vios may be alittle on the narrow side (32-34" waist max.) and I just wanna make sure they're not overly snug.

martin82 05-29-2012 01:39 PM

you will really need to just go and sit on them and measure......

NoirG 05-31-2012 12:55 AM

Recaro pole position is a great seat too

gomer_110 05-31-2012 10:38 AM

Anybody have experience with the Bride Zieg III Type-R? Just came across this seat today and looks like a possible winner.


All times are GMT -5. The time now is 07:19 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2