Nissan 370Z Forum
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   UAM Widebody Fender Teaser... (http://www.the370z.com/exterior-interior/44535-uam-widebody-fender-teaser.html)

370Z JT 11-13-2011 01:42 PM
No pics from SEMA?

bullitt5897 11-13-2011 05:11 PM
We had some adjustments that need to be made to the prototype... I want people to be able to run any tire combo they want. I will have more pics up soon. We also had paint starting to spider and crack that needed to be addressed.

Mike

Reaper42 05-16-2012 01:50 PM
bump?

dirTy_shoeZ 05-19-2012 02:00 PM
I love these :).... Did I mention I love these :)

binary0x01 08-01-2012 03:28 PM
So is this coming out at some point for real or no?

bullitt5897 08-01-2012 03:29 PM
Quote:
Originally Posted by binary0x01 (Post 1849569)
So is this coming out at some point for real or no?
These will be coming out. Once the car is on the east coast they will go into molds for full pre-preg (wet/dry) Carbon or FRP.

Mike

binary0x01 08-01-2012 03:35 PM
Quote:
Originally Posted by Bullitt@UAMotorsports (Post 1849573)
These will be coming out. Once the car is on the east coast they will go into molds for full pre-preg (wet/dry) Carbon or FRP.

Mike
Alright cool.

What will be required to get the wheels further outward? spacers?

Also what wheel setup will be recommended? Will I be able to keep my stock wheels? (I actually like my stock 18")

Tnx.

Kingbaby 08-01-2012 03:39 PM
Quote:
Originally Posted by binary0x01 (Post 1849597)
Alright cool.

What will be required to get the wheels further outward? spacers?

Also what wheel setup will be recommended? Will I be able to keep my stock wheels? (I actually like my stock 18")

Tnx.
You'll need a 25mm spacers to bring the wheel out the same width as the fender!

binary0x01 08-01-2012 05:03 PM
Quote:
Originally Posted by Kingbaby (Post 1849609)
You'll need a 25mm spacers to bring the wheel out the same width as the fender!
But that's the same spacers you need for the stock fender to be flush with the wheel... I thought this kit makes the body wider.

If it does make the body wider; by how much so?

bullitt5897 08-01-2012 05:05 PM
It is 25mm wider than stock.

so you would need a 50mm spacer... put it this way I am running an 11 +0 front... with 285's

Reaper42 08-01-2012 05:18 PM
So pretty much no one is going to buy this. lol.

I wish the 370 had the aftermarket support the BRZ/86 is getting. They already have multiple practical widebody kits

Although Im sure this UAM fender will be nice for the hard park enthusiasts

KaienZ34 08-01-2012 05:35 PM
Well some people will get new wheels. Then you can pick the offsets you want that will work with these fenders.

Kingbaby 08-01-2012 05:52 PM
Quote:
Originally Posted by binary0x01 (Post 1849786)
But that's the same spacers you need for the stock fender to be flush with the wheel... I thought this kit makes the body wider.

If it does make the body wider; by how much so?
Yep...misread/comprehended your question

Quote:
Originally Posted by Bullitt@UAMotorsports (Post 1849790)
It is 25mm wider than stock.

so you would need a 50mm spacer... put it this way I am running an 11 +0 front... with 285's
:iagree:

Pandahugs 08-13-2012 07:23 PM
UAM JSE fenders for the Z
 
1 Attachment(s)
Hey, how can I order these UAM FSE fenders? And how much would they cost?


All times are GMT -5. The time now is 06:55 PM.
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2