40th 370z front bumper
 

Returning home from Dallas I had a large piece of road debris smash my front bumper which chewed it up, popped my wiper flood reservoir and fender liner. It was actually shot at me by the truck in front.

I had the work estimated at about $1000 which included a new front bumper vs. a sleeve etc. Sleeve WTF??

Questions:
Do you know of a web site that sells OEM front bumpers?
Is it worth buying an after market front bumper vs. the OEM? Any recommendations would be great!
Does the OEM bumper come with holes drilled out already for the Nissan emblem? I want to delete it!


Thanks,

Dave

Great time to consider an aftermarket front fascia, if you were looking before otherwise have them order an OEM bumper from one of the dealerships.

1. Lots of web sites, do a google search. You can also order the Nissan and Nismo from your dealer.
2. Depends on if you want to upgrade or not. Some like the OEM/Nismo look, others like the aftermarket/ricer look. Just stay away from fiberglass/cheap/ebay bumpers. Stillen is a popular alternative.
3. No it does not, but your bodyshop can "shave" it.

If I purchased a Nismo front Bumper do I need anything else to make the bumper work?

yes, nismo bumper requires quite a bit of work to fit.

try Nissan Parts, NISMO and Nissan Accessories - Courtesyparts.com for your nissan bits.

Really? I thought that cosmetically only the front and rear bumpers were different.

no i read that you have to do quite a bit of parts changing especially the front to fit the nismo bumper.

and the side pieces are different too on the stock nismo vs base. (not talking about the s-tune). :)

If you are buying an ACTUAL OEM bumper, then yes, it will be just like the one that got smashed. If you're buying a replica, then there will be a lot of fitting.

Thanks for all the input. I also noticed that shaving the Nissan emblems off is a big deal. I’m going to pass on the mod even though it is really cool.

Check the classifieds. At least a couple of owners put up their 40th Anniv. bumpers for sale several weeks ago.

Does anyone know what goes into adding a Nismo bumper? besides the bumper?

Here is what you need for a front Nismo bumper conversion.

• Front bumper - FBM23-1A47H ($578.61)
• Front bumper diffuser - F2026-1A47A ($346.01)
• Wheel well protectors - F20641A30A, F20641A30B, F20641A30C, F20641A30D ($97.24 EA)
• (Two) Bracket-Front F20421A30A (62675) ($83.47 EA)
• (six) Rivets U0RVT1A007 (62010R) ($1 EA)

The rest of the parts you can use from your original bumper hardware

Optional: You can mod/hack your original ones to fit or get the real ones

• F3845-1A30A (Front inner wheel well liner for one side) ($54.13)
• F3844-1A30A (Other side) ($54.13)
• G5892-1A30A (Under Engine Cover) ($964.91)

http://static.japcat.ru/ecatimg/niss..._620_A_002.gif

i would stick to OEM it would be cheaper than doing a full conversion, that an it wouldn't look the same without the rest of the body to go with it

I agree with you.

Actually does not look too bad at all with just the front bumper.

http://www.the370z.com/members/tjlaz...-left-side.jpg

Does not look too bad?

I think this conversion looks awesome! In fact, I've thought about buying a NISMO and trying to find someone to trade hatches with me just to lose the rear wing. It's the front end that makes all the difference for me.

No disrespect meant to the NISMO owners, I'm old (53) and it just doesn't work for me.

I'm closing in on a deal for a 2011 Touring Sport, and have been tagging all my favorite threads for eventual mods - Nav override and this one.

What did you end up doing with the front under tray? That seems to be the most expensive part after the front cover. Can you just leave the thing off?

Thanks!

I used the stock one, it fits fine. You just have to drill a couple holes in the diffuser to attach it together.

Need body parts for my 370z (z34) nismo 2011
 

Greetings...

Am from Dubai, and I need body parts for my 370 Z NSIMO 2011 model. As Nissan dealer cant arrange it before 1 month. Kindly find the parts I need BELOW AND in the att file.

JN1AZ4EH3BM553563

PARTS REQUITER:

FRONT BUMPER FBM23-1A47H
BUMPER UNDER COVER 62026M
NO PLATE BRACKET 62740
BUMPER SAID BRACKET (2) 62673P & 62674P
R-H FINDER WHEEL LINER F3845-1A30A
UNDER ENGINE COVER G5892-1A30A

Thanks
Khalid
97150 5091919
Mail: mr_k.o@hotmail.com

From my past experience:

If you like the oem look just buy from the dealer, you cant go wrong with that. After market bumpers require a lot of work in terms of fitment and touch ups. And you have to consider the paint job and paint matching, which will cost $300-600. Labor and the cost of the bumper 'might' put you over $1k.