Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Bumper Plugs (http://www.the370z.com/exterior-interior/37077-bumper-plugs.html)

gmr19 05-26-2011 08:03 PM

Bumper Plugs
 
Hi,

My car came with the front license plate mount and I took that off, but now there are two ugly white plugs mounted in the bumper. I want to take them off and maybe get some black plugs from somewhere. But I'm not sure how to go about removing these plugs. From the manual, it looks like there is a 90 degree anchor holding them in! Is it even possible to take these out without damaging the bumper?

Thanks!

Grant R.

EazyD 05-26-2011 08:19 PM

:wtf2: misleading title



:stirthepot:

kenchan 05-26-2011 09:10 PM

how about you mask off the plugs and just paint it while it's still on the car?

how about some e-tape or vinyl or 3M DiNoc?

or just get a upper CF cover for the fang area and be done with it? :)

Masa 05-26-2011 09:13 PM

Man I wish I could run no front plates... I lasted a whole THREE days before I was pulled over. :(

PapoZalsa 05-26-2011 09:23 PM

You are lucky the dealer didn't drilled 2ea - 1 inch holes on the bumper.

kenchan 05-26-2011 09:25 PM

yep, getting pulled over for no front plates got old for me too. when i bought the Z the dealer asked me to install it at home since he knew i was a car guy and pretty picky. :D

kenchan 05-26-2011 09:28 PM

op- here's the link to the cf upper lip thingie. should cover up your plate bracket holes nicely. :p

The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts: Carbon Fiber Front Upper Trim, 09-10 370Z

buddahson 05-26-2011 10:02 PM

I actually broke the white plugs off trying to remove them. Then I used some black motorcycle windscreen screws as plugs.

TreeSemdyZee 05-26-2011 10:35 PM

Quote:

Originally Posted by kenchan (Post 1135400)
how about you mask off the plugs and just paint it while it's still on the car?

how about some e-tape or vinyl or 3M DiNoc?

or just get a upper CF cover for the fang area and be done with it? :)

Time for an intervention. Your addiction to DiNoc is becoming dangerous. :roflpuke2:

happytheman 05-26-2011 11:15 PM

Quote:

Originally Posted by kenchan (Post 1135428)
op- here's the link to the cf upper lip thingie. should cover up your plate bracket holes nicely. :p

The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts: Carbon Fiber Front Upper Trim, 09-10 370Z


Is "thingie" the official Nissan part number? So..say I were to walk up to the parts counter and ask for a CF upper lip thingie they'd be able to take care of the OP?:tup:

kenchan 05-26-2011 11:22 PM

Quote:

Originally Posted by TreeSemdyZee (Post 1135519)
Time for an intervention. Your addiction to DiNoc is becoming dangerous. :roflpuke2:

really? :D i didnt think i was "addicted"... i haven't wrapped my wife in it yet..? :p

Quote:

Originally Posted by happytheman (Post 1135597)
Is "thingie" the official Nissan part number? So..say I were to walk up to the parts counter and ask for a CF upper lip thingie they'd be able to take care of the OP?:tup:

no but if you ask the zstore im sure they'll know wat you're talking about. :tup:

FromG2Z 05-26-2011 11:52 PM

yeah no front plates for me. Couldn't stand it. A ticket or 2 a year is worth it for me.

PapoZalsa 05-27-2011 01:16 PM

Quote:

Originally Posted by FromG2Z (Post 1135628)
yeah no front plates for me. Couldn't stand it. A ticket or 2 a year is worth it for me.

I would kept mine without the front license plate too.

But to go on base I need the freaking front license plate.

Plus the Republic of VA cops don't play, if I get pull over then I will get a ticket for no front plates, ilegal tint and exhaust. :mad: :shakes head:

shadoquad 05-27-2011 01:18 PM

Quote:

Originally Posted by PapoZalsa (Post 1136516)
I would kept mine without the front license plate too.

But to go on base I need the freaking front license plate.

Plus the Republic of VA cops don't play, if I get pull over then I will get a ticket for no front plates, ilegal tint and exhaust. :mad: :shakes head:

This is so true. VA cops will spank ya.

happytheman 05-27-2011 02:33 PM

Quote:

Originally Posted by kenchan (Post 1135603)
really? :D i didnt think i was "addicted"... i haven't wrapped my wife in it yet..? :p

Are you sure this isn't her?:bowrofl:

Carbon Fiber Corset
http://www.carbonfibergear.com/wp-co...ber-corset.jpg
http://www.carbonfibergear.com/wp-co...ber-corset.jpg
http://www.carbonfibergear.com/wp-co...ber-corset.jpg
Get Your Fantasies Fulfilled With Carbon Fiber Lingerie | Carbon Fiber Gear

TypeOne 05-27-2011 04:11 PM

Be thankful your bumper doesn't look like mine.

I got two holes in the black part AND two holes above it.

http://i51.photobucket.com/albums/f3...r/03159a97.jpg

:-(

happytheman 05-27-2011 04:17 PM

:barf:

I'm feeling ill after seeing what's been done to your poor bumper.

sonic370 05-27-2011 08:29 PM

thats just nasty sorry. i drive without my front plate also.......
caught the dealer before he had a chance to put it on......
it's not legal in texas so i'm pressing my luck.............
they don't mess with vettes here. .. i bet 7 out of 10 don't have them..

PapoZalsa 05-27-2011 10:24 PM

2 Attachment(s)
Quote:

Originally Posted by TypeOne (Post 1136944)
Be thankful your bumper doesn't look like mine.

I got two holes in the black part AND two holes above it.

http://i51.photobucket.com/albums/f3...r/03159a97.jpg

:-(

Try this, I was so mad. :mad:

gmr19 05-28-2011 02:54 PM

Quote:

Originally Posted by kenchan (Post 1135428)
op- here's the link to the cf upper lip thingie. should cover up your plate bracket holes nicely. :p

The Z Store! Nissan-Datsun 240Z-260Z-280Z-280ZX-300ZX(Z31/Z32)-350Z-370Z Parts: Carbon Fiber Front Upper Trim, 09-10 370Z

That actually looks pretty nice. Is this aftermarket?

Thanks!

didymus 05-28-2011 03:46 PM

Quote:

Originally Posted by Masa (Post 1135407)
Man I wish I could run no front plates... I lasted a whole THREE days before I was pulled over. :(

Awww I was hoping to get away with it.. Maybe in the city...

Kirkster 05-28-2011 07:45 PM

No plate on mine since I went F.I.

Will see how that goes...

kenchan 05-28-2011 07:54 PM

Quote:

Originally Posted by gmr19 (Post 1138591)
That actually looks pretty nice. Is this aftermarket?

Thanks!

Yep. Should turn out real nice. :)


All times are GMT -5. The time now is 04:25 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2