Quick simple question about Resistors(turn signals)
 

I currently have all four of my turn signals LEDed. They have hyper flashing.

My question is, I need 6ohm and 50 Watt resistors, will a higher or lower Ohm/Wattage work?

I prefer buying these locally but the 6ohm/50 Watt is hard to come by.

All you need is 4 of these in the link just order them off the net you will get them in a few days.

6 OHM 50W 2 BULB LED LOAD EQUALIZER RESISTORS TURN SIGNAL BLINKER FIX

You can go with the 6 Ohm/50w resistors, but you will need 1 for each turn signal (4 total). If you get the 3 Ohm/50w resistors, you will only need two (1 for each side). These can be mounted in the front or back, it doesn't matter. As stated above, just buy them online, and you will have them in a few days. I use this website: LED Flashers Blinkers Resistors Load Equalizers for Turn Signal Replacement Bulbs Rapid Flashing Fix
Hope this helps!