are these the right LED's????
 

trying to replace the following bulbs, but just wanna make sure i order the right stuff!

turn signals front and rear bulb number (and do i need resistors for each bulb?)

brake light bulb number

backup (reverse) light bulb number

if someone could tell me these numbers and what all resistors i need that would really help, i looked on here but didn't find anything!

Hey, I got the following info from Sylvania's site:

"2009 NISSAN 370Z

High & low beam headlamp
HID-D2S

Parking light
2825
2825LL SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.
7444NA

Front turn signal
7444NA

Rear turn signal
992 (7440A)
992/7440AL SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

Tail light
LED

Stop light
LED

High mount stop light
LED

License plate
2825
2825LL SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

Back up light
921
921ST SilverStar: The brighter, whiter signal light. Up to 30% brighter light, up to 20% whiter light and up to 10% farther and wider.
921LL SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety.

Front sidemarker
LED

Rear sidemarker
LED

Trunk/Cargo area
158
158LL SYLVANIA Long Life miniature bulbs perform twice as long as any standard miniature bulb. Designed for durability, lower maintenance and greater safety."

As for the turn signals, I think you need a variable load resistor; I was thinking about doing the LED conversion for the turn signals when I got my headlights done, but I actually kinda like some "yolk" in the headlight.

tl123567891011 - make sure you rep waaaaasabi. :D

sure did

and thanks for the info wasabi, although i have found no led's for 7444, i found some for 7443 which is what i have heard will still work. i am replacing all turn signals with red led, everything else white, just waiting on the combined invoice and i'll be good to go. should only need resistors on each turn signal bulb right?

lol sabi with his bi-annual post.

7444 LEDs items - Get great deals on eBay Motors items on eBay.com!

Tons here man!

Are any of you guys with LED bulbs using load resistors? I'm not exactly sure which one works with our cars. From a quick search I found 6 ohm 50W resistors. Let me know what works for you guys as I plan to integrate this resistor to the PCB I'm making for the turn signals.