what the hell does me turning into a pole too low to see from the driver seat have to do with my wipers

Everything ;)

JDM rear wiper part numbers
 

For those that are interested in doing this mod on USDM Zs....

A partial list of the rear wiper part numbers:
motor assy - rear wiper = 28710-1EK0A
seal - pivot = 28716-1EK0A
nut = 28889-01G0A
cover - arm, back window = 28782-CD001
arm assy - rear wiper = 28781-1EK0A
------------------------------------------------------------------
Arabian/Argentinian/Brazilian stalk: 25560-1EL0B (with rear wiper)
or
Euro stalk: 25560-1HA7A (daytime running lights; with rear wiper)

Im interested in this what is generally everything I need for a 2009 touring in USA?

The thread is 5 years old. L33T Z34 has not been on since 2015 and appears to be banned.

Well true, but I'm still very interested in this mod and wonder where to even buy this stuff.

Just buy a Z33, comes with a free rear wiper :icon17:

Joey Z,
You can buy everything, but the problem is the the two wires from the BCM to the wiper motor. The wiper motor has a three wire connector, pin 1 is power , pin 2 not used (not even there), pin 3 is ground and pin 4 is for parking the wiper. You will have to run two wires from the BCM to the hatch on the the left side through the gromet that connects the body to the hatch. Know comes the hard part, I have been unable to find the wires in any manual that shows which connector/s that have the wires that go to the rear wiper motor. One wire from the BCM is for PIN 1 and the other wire is for PIN 4. pin 3 IS EASY IT'S GROUND AND ATTACHES TO THE HATCH DIRECTLY FROM THE MOTOR. If you have any luck finding these two pin locations on the BCM let me know.

Best Regards and good luck
Javier

The member you are contacting has not visited the site in a year.

:facepalm:

Rear wiper
 

Let me know if you still have your 370z. I have the rear wiper on mine. I can give you the details on the process. The parts are rather cheap to get your hands on.

Hi javbat, I'd like to add a wiper to mine, if you feel like writing it up here that would be greatly appreciated!

Hello TobinH,
Been overseas, just got back. I bought two motors from overseas on ebay. I drilled the hole on the rear hatch. The mounting holes are already in the rear hatch and are threaded inserts. The rear hatch wiring harness and the wiper arm assy, I also bought on ebay from England. Even though the USA BCM in the shop manual says that the rear wiper is turned on. It will not run with that the stalk I also purchased from England. I did create my own work around for this with a switch and relay. The real issue is the hole in the rear hatch glass for the water nozzle. I was able to locate a rear hatch on ebay from overseas being sold in the states. I bought the rear hatch and it came with everything, which made that easy and I had the hatch repainted. My suggestion is try to find the rear hatch on EBAY and have it painted to match your car. The rest is easy, I have the wiring and relay diagram that will make the rear wiper work.

Tobin you can email me at javbat@hotmail.com and i can send PDF of wiring switch and relay. I have uploaded pics of hazard switch relocation and installation of wiper switch.