Yeah, they do look slightly crooked but they are pretty sweet. Nice job.

Looks awesome!

Thanks :tup:

I think it's more noticeable in the pics than in real life... if it annoys me I can always pry off the center piece and adjust it.

I'll see how many people notice it and go -- "wow, that's crooked" :icon17:

Thats the first thing i thought. :icon23:

All bs aside... good job man. Looks great!

They do look good :)

They do need a little straightening as said. Any closeups?

Perhaps after I readjust :icon17:

Also, my camera is shite, so I think a closeup will just be blurry.

I'll futz with it tomorrow and then take some more pics.

Love what you did, Jordo! Both do appear to be slanting to the right. I'm not sure I would have noticed if I was just looking at the car without focusing on the emblems.

Thanks!

After taking another look at it on the car last night, it's really slight. I'm going to take a good hard look tomorrow in the daylight (didn't get a chance to mess with it today) and decide if it's worth the trouble.

I don't think anyone looking at the car in real life would even notice, but I get nitpicky, so knowing me I'll probably end up readjusting them...

Other than that, I really like 'em.

The outside emblems appear straight, but the Z part inside looks twisted on both of them. I think what you need to do it take a good straight edge and lay it across the bottom of the two silver wings and then line up the bottom of the Z parallel with that.

I personally think it's really noticeable. It was the first thing I noticed when looking at the pictures.

Good idea -- will do.

That looks nice Jordo! Not quite my style but it is very well done, props for being different.

Thanks, but this is not a work of originality; it is copycatting at it's finest.

The guys at Datsun Freeway are the inventors. I'm just duplicating their fine work.


‚R‚V‚O‚y�@•W�€ƒt�[ƒhƒgƒbƒv�EƒGƒ“ƒuƒŒƒ€


Heh. Actually. their's looks a bit crooked too :icon17:

Jordan, look here:

Drafting Metal Rulers

You can't go wrong with having a high quality ruler around. You can use it for accurate measurements and also a straight edge. I have one similar to this:

C-Thru Ruler .5x6.25 Stainless

I use it all the time when working on guitars to set up the string height accurately. On the Celica, it was nice because you could lay it on the top of the front cover and use it as a straight edge to really accurately check cam timing.

Thanks, dude :tiphat:

I had actually used a straight edge to try and align them the first time I mounted the center piece to the outer ring-- the problem is that the two tabs on either side curve a bit, so it's easy to get things misaligned using that as the guide.

I just readjusted using a straight edge and straight body lines of the hood/trunk to realign. The front was only slightly off, but the rear was so far off, I'm beginning to wonder if the glue yanked it a bit to one side as it cured -- either that or I am seriously incapable of tracing a straight line with my eye even with the assistance of a ruler (of course, I'm left/right directionally challenged, so this could be yet another limitation of my mushy brain :icon17: ).

I've got painters tape on to hold everything in place and will snap pics later today or tomorrow :tiphat:

All right, take 2:

http://www.the370z.com/members/jordo...installed3.jpg

http://www.the370z.com/members/jordo...installed1.jpg

http://www.the370z.com/members/jordo...installed2.jpg

I think that's on straight now... might be just a cvnt hair off in the front, but close enough. Back is definitely perfect.

much better! nice job dude...

Nice.

Thanks :tiphat:

Seriously, those stupid things looked straight until I mounted them to the car... :icon14:

Was I drinking while working on them...? :icon17:



Project complete! :tup:

:tup:

:tup: Great job!

Thanks, guys :tiphat:

Hmmm... now I kinda want to remove the "370Z" logo... it breaks up my NSEW Zness :icon17:

The 370Z is a little redundant now too...

Nice job!

I don't want to make you mad, but I noticed the front Z is upside down.

^^ I noticed that too

Are you guys yanking my crank...?

Son of a mother ******* **** sucking jism drinking bitch!!!!!!!

:facepalm: :facepalm: :facepalm: :facepalm: :facepalm:

Argh... I'll fix it tomorrow. I didn't realize that... thanks...

So in conclusion: I recommend everyone who wants one to just spend $130 plus shipping and buy it from someone else :icon17:

Is there a prize for the best profane post?:bowrofl:

Hysterical! Repped for that alone!

Flipped, straightened, re-taped to hold in place while the glue sets.

Pics later or tomorrow...

Grumble...

Okay -- NOW the project is complete!

http://www.the370z.com/members/jordo...installed2.jpg

Done -- it's Miller time :icon17:

Jordo looks good. Now for the next step of running LEDs to them.

The next step is making sure they don't fall off :icon17:

If one of those falls off or gets damaged I am just going to buy the pre-made ones.

Fvck all this arts and crafts sh!t :icon17:

Miller? It was maybe Miller Time when you had them on crooked. Now it's single malt scotch time, or Beefeater martini, or a body shot off some hot girl time.:tup:

Good ideas! Great minds drink alike, buddy :tup:

yah, makes your car looks special. nice idea. :tup:

for me i'd perfer something flatter/less obvious maybe?

:rofl2:

This actually made me laugh more than creating Prinya's fake Facebook account today.

The look way better now. Still way too many "Z's" for my taste, but glad you like them.

Removing the 370Z badge?

:facepalm:

Don't be that guy. That's for ricers with the entry level car that they want to pretend is better than it is.

Ha ha ha -- I'm leaving it alone. I've had enough art projects for the time being.

Next project: Splash guards :tup:

In for pics jordo! I suggest you drop everything and get right on it:excited:

Don't want to be a **** but did this months ago. Even had mine painted in the middle and outside to match my car

Matthew I love to see pics of that :tup: Where can I find the thread?

Check my albums I have the rear one in my z pics I'll post the front in a few

Eh... the splashguards do not look any more exciting on mine than they do on anybody elses anyway -- not really photo shoot worthy :ugh2:

Most people who see my car don't even notice they weren't there before :icon17:

Anyway, my camera sucks red baboon balls... :icon14: