|
Just following up on Kyle's comments about the Fascia clearing the intercooler/intakes.
The Stillen Fascia will clear the GTM TT Kit. We installed the fascia on a customer's '09 Base model that recieved the GTM kit a few weeks ago. I will state that the optional brake ducts WILL NOT work due to the intercooler and associated piping. |
Quote:
|
Quote:
|
Quote:
|
Quote:
As for not putting the glue/filler in the line I don't think I would be interested in doing that since i don't want to be able to see the lines at all. Frank |
Quote:
Quote:
Frank |
mine is holding up just fine after several track days.
|
Quote:
Frank |
So I was walking by a photo of my old truck in the lobby today and realized something...I did something VERY similar to this on my old truck I had just totally forgotten about it. In fact, it wasn't even as good as this new setup.
On my old truck I had an issue with the fitment of my wheels. The truck cycled 16 inches of wheel travel and could clear 37 inch tires. However, we wanted to run the STILLEN urethane bumper cover but the bumper cover hung about an inch or more lower than the stock bumper. So, I had an issue with tire clearance, it rubbed like a BITCH. To fix this we just took a pie cut straight out of the center on both sides of the bumper about an inch or two long and then bonded it back together. It was very easy and worked great. As far as cracking is concerned. To put it into perspective of what this front bumper stood up to: 1) I was on my way to a photo shoot one day and I was about to exit the freeway, I looked over at the lane I wanted to be in and saw that the Expedition in front of me was towing a trailer with a large cardboard refrigerator box on it. I had noticed it for awhile as we had been traveling down the freeway side by side for quite some time and I felt comfortable following him. About ten seconds after I pulled into the lane the cardboard box came off the trailer and smashed right into the front of my bumper!!! I pulled off to the freeway expecting to see all kinds of damage to my hood, bumper, grill, possibly headlights etc. Turned out the only damage to the truck was the paint had come off my bumper......because my painter used "adhesion promoter" not primer like I instructed him. Hence the reason I am so adamant about using primer NOT "adhesion promoter." I took the bumper back to him the next day and picked it up a few days later good as new. 2) I took this truck to a photo shoot with Truckin' magazine at Dumont dunes where we raced around the sand dunes and through the whoop roads while they snapped a ton of photos. 3) I took this truck to Glamis for President's weekend and drove around like a mad man all weekend long. Through the whoop roads to Oldsmobile hill, through the roads around our camp, for three days this truck saw nothing but sand and I had to fill the fuel tank a couple times. As far as what abuse did it see? Well, if anyone ever sees this truck just look inside the wheel wells and look at the upper control arm. Notice the massive bolts holding the upper arms to the spindle. Then look directly above it at the bottom of the wheel well and notice the hex shaped stamp imprinted on both sides of the wheel wells...Yea...that was a good jump! That jump used about 17 of my 16 inches of wheel travel LOL! Here are some pictures of the truck: STILLEN : Project Vehicles - STILLEN Nissan Titan Silver Those are just a few examples of the abuse I put that truck through and that bumper held up perfectly fine and never showed any indication of cracking or anything. The reason I mention it is because that bumper did not have any other support to it, just the urethane epoxy holding it together and because it was properly prepped and installed, I never had an issue. I know for a fact that if it is done correctly, you guys also won't have any issues with it. With that being said, toner to answer your question, I am talking with Steve Millen right now about us blending that line before we ship the fascia's. He is looking into what's involved and I will have a quote for you tomorrow. Thanks! Kyle |
Quote:
|
Quote:
Thanks again Frank |
Toner- Talked to Steve and our modeling shop guys and we can do this for you for $50.00.
Only thing I'm trying to find out right now is about the freight and the size of the box we will need to use. |
Quote:
Frank |
I got this today:
http://www.the370z.com/attachment.ph...1&d=1299257642 Exterior > Body Components STILLEN 370Z Body Kits & Aero Components Photo shown may be representative Hover mouse over image or click The highly anticipated development of the STILLEN 370Z Urethane Front Fascia, Side Rockers and Deck Wing is now a reality. This 370Z body kit just looks great but is fully functional as well. STILLEN urethane components are prototyped, and molded in our state of the art facilities in Costa Mesa, California The result is excellent fitment and durability every time. Front Fascia The STILLEN 370Z Front Fascia offers a clean yet aggressive styling while utilizing factory mounting points so it fits and flows with the cars original lines. Besides looking good the Front Fascia is fully functional with large open areas for Intercooler, oil and transmission coolers. Also an air diversion path was built into the Fascia to provide fresh air for the STILLEN Gen 3 Intake or Supercharger. Modular Vents These Vents work in conjunction with a Brake Cooling Kit currently in Development. Also the Modular Vents follow the same lines as the OEM Nissan 370Z "Fangs" to provide a more Factory look. Side Rocker Panels Designed and modeled after Steve Millen’s award winning IMSA 300ZX and our STILLEN Targa Newfoundland GT-R these 370Z side rocker panels are fully functional applying a incremental amount of down force at higher speeds thus keeping the car planted and more stable through high speed corners. Another major benefit of the rockers is the greatly improved appearance offering a much more aggressive look. Deck wing Uniquely designed to follow the contours of the vehicle the STILLEN 370Z Deck Wing doesn’t just look great but is fully functional improving down force and high speed stability Finally with Made in USA direct molding Polyurethane construction you can be assured you’re getting OE quality and strength that is backed by a STILLEN limited lifetime warranty against cracking or breaking under normal use. Exterior > Body Components STILLEN 370Z Body Kits & Aero Components Photo shown may be representative Hover mouse over image or click The highly anticipated development of the STILLEN 370Z Urethane Front Fascia, Side Rockers and Deck Wing is now a reality. This 370Z body kit just looks great but is fully functional as well. STILLEN urethane components are prototyped, and molded in our state of the art facilities in Costa Mesa, California The result is excellent fitment and durability every time. Front Fascia The STILLEN 370Z Front Fascia offers a clean yet aggressive styling while utilizing factory mounting points so it fits and flows with the cars original lines. Besides looking good the Front Fascia is fully functional with large open areas for Intercooler, oil and transmission coolers. Also an air diversion path was built into the Fascia to provide fresh air for the STILLEN Gen 3 Intake or Supercharger. Modular Vents These Vents work in conjunction with a Brake Cooling Kit currently in Development. Also the Modular Vents follow the same lines as the OEM Nissan 370Z "Fangs" to provide a more Factory look. Side Rocker Panels Designed and modeled after Steve Millen’s award winning IMSA 300ZX and our STILLEN Targa Newfoundland GT-R these 370Z side rocker panels are fully functional applying a incremental amount of down force at higher speeds thus keeping the car planted and more stable through high speed corners. Another major benefit of the rockers is the greatly improved appearance offering a much more aggressive look. Deck wing Uniquely designed to follow the contours of the vehicle the STILLEN 370Z Deck Wing doesn’t just look great but is fully functional improving down force and high speed stability Finally with Made in USA direct molding Polyurethane construction you can be assured you’re getting OE quality and strength that is backed by a STILLEN limited lifetime warranty against cracking or breaking under normal use. = Additional Photos | = Application Notes | = Brake Fitment Profile | = Dyno Chart | = Installation Instructions | = Product Brochure | = Sound Clip | = Video Clip Buy = Item Qualifies For Free Shipping Program NISSAN Application Notes Description Part # Mfg # Price 2009 - 2011 370Z Front Fascia KB11121 KB11121 $565.47 $537.21 Buy 2009 - 2011 370Z Optional Modular Inserts (Fangs) Will work with upcoming Brake Cooling Kit KB111216 KB111216 $129.00 $99.00 Buy 2009 - 2011 370Z 3-Piece Mesh Grille Black Powdercoated KB11121LG KB11121LG $71.07 Buy 2009 - 2011 370Z Rear Wing KB11123 KB11123 $349.17 $337.63 Buy 2009 - 2011 370Z Urethane Side Skirts Functional Downforce Design (Pair) KB11125 KB11125 $483.07 $447.54 Buy |
| All times are GMT -5. The time now is 04:30 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2