Originally Posted by frost (Post 77461)

Sounds like a photoshop is in order.

Originally Posted by Phimosis (Post 82271)

Can someone Phoshop me a 370z with a front or rear hamburger with a Datsun logo?

Originally Posted by desunaito (Post 152013)

I want to pull the nissan emblems off, paint them black then reattach. What kind of adhesive to I need to use to stick the emblems back on?

Originally Posted by SoCal 370Z (Post 36773)

I just got done detailing the Z, and I personally dislike the 370Z emblem as it is the only item on the car that sticks out as it does, therefor its time on the car might be drawing short. What are others going to do?

Originally Posted by ZKindaGuy (Post 152562)

You forgot a poll choice: Desire to remove or change is dumb.

Originally Posted by BMW Killa (Post 152567)

Thanks for your enlightening post.

Originally Posted by ltp (Post 37968)

I used dental floss to remove the "370 Z" emblem by seesawing the floss through the emblem at the angle with least glue surface. The dental floss has wax which makes it easy to cut across the emblem’s glue and preventing it from scratching the paint. I also wet the floss with Goo Gone to make it even easier to slice it through the glue. Once the emblem is removed, I removed the bottom glue layer by slowly rolling off the glue with my finger or cotton towel from one end to the other end. Then I used Goo Gone to clean up whatever left over. This took me only 15 minutes. I have not tried to remove the “Nissan” emblem because it may have holes and waiting for the Z logo to replace it with. I hope this helps.

Originally Posted by par4bmw (Post 37735)

Plan on removing the 370Z and Nissan. Replacing the Nissan with this once 370ZSource sells it:

http://www.the370z.com/avatars/mh-370zsource.gif

I hope they sell it, it would look killer! :cool:

Originally Posted by Smallywood (Post 154540)

Aren't the front and rear emblems the same size? I would love to replace both Nissan badges on my ride with these...

Originally Posted by Shunya (Post 152615)

no emblems what so ever.

Originally Posted by Modshack (Post 154613)

Here's a shot of the 370 rear emblem laid over thebackside of the larger "Z" front one. (The red is the 3M sticky tape) You can see the front is fractionally larger. I'm thinking the larger will rest flush on the bumper, rather than being recessed like stock. I'm about to try this when my car comes back from the body shop with a new rear bumper (minus the emblem mounted). If it's not quite big enough to stick around the edges, I've already cut a 1/8" filler piece to mount in the recess and it will stick to that. I'll do an update on this when the car is back.

http://images52.fotki.com/v1553/phot...MG_2039-vi.jpg

http://images51.fotki.com/v1549/phot...MG_2038-vi.jpg

Here's the "Z" on the front for reference:
http://images49.fotki.com/v1500/phot...MG_1851-vi.jpg