yah, as for adhesion promoter you can get it at most autoparts stores.

i know for sure primer with flex agent is available at places like paintscratchinc.com and paintworldinc.com but not sure if its available locally.

you might be able to get away with regular primer since the bits are pretty small... if you know you'll be scuffing it up from ramps and entrances you might want to consider the flex agent.

just a random question. If we order the 3 piece and one piece ever gets damaged, can we order single replacement pieces?

aha! well, considering i have to trim the center piece (due to CF fang) i suppose the 3pc CF is more convenient to cut and install.

So...

3pc CF $329 for me...
1pc CF for AK and others. :tup:

You could cut the fang and leave the lip alone. just a thought.

I want a 1pc CF too!!

Yes of course.

that's going to be very difficult cause that fang is not coming off the bumper very easily... :icon17: i dont want to cut CF while on the bumper...

Let me guess, VHB? :bowrofl: :icon17:

I forgot you used the super duper double sided tape:icon17:

:icon18: yah, this thing aint coming off any time soon. :tup:

Yes u can, I had to do something similar to that.

Humm ture. You might break the fang cover. But sanding down the center lip will be hard too. You might need to cut the fang while it is on the car.

im planning on using a dremel with metal cutter bit to trim parallel along the top portion of the center CF bit... would that be impossible to do? :confused::confused:

John im guessing it wasnt installed ?

EvoR- if you can get me the 3pc CF, i bet you i can install it faster than NYJon. :D