JP Lip and S-tune sides/rear installed
 

Whats up guys.. just a few pics the wife and I took over the weekend.. FINALLY got my JP USA lip and Nismo S-Tune sides/rear valence pieces installed.. We took more pics as we were playing around with some lenses on the camera, but these were only ones that came out decent.. :(

S-tune pieces were from Dustin@Z1 and JP Lip was from Eric@Driveline. Thanks to both of you..

The S-tune stuff obviously, being that its made by Nissan, fit perfectly.. Super easy.. The JP Lip, being that its Urethane (Flexible, kinda like super hard Rubber) was a little more challenging.. But overall still came out pretty well..

I'll shut up now.. here's a few pics..

http://www.jdmgallery.com/wp-content...6/IMG_0026.jpg

http://www.jdmgallery.com/wp-content...6/IMG_0044.jpg

^^ Yes that's a 305 tire. :)

http://www.jdmgallery.com/wp-content...6/IMG_0050.jpg

http://www.jdmgallery.com/wp-content...6/IMG_0053.jpg

And I know I need to cut my grass.. stfu it was raining on and off all weekend and had more important things to do like play with cars. :)

wow..that looks beautiful! :drool:. VERY nice man! I like the side ground effects a lot. The front lip looks great too. :tup: :tup:

Does the lip comes with the fangs or you painted fangs separately?

I sharpened the pics a little:

http://i576.photobucket.com/albums/s...050_edited.jpg

http://i576.photobucket.com/albums/s...053_edited.jpg

sick!

Looks Pretty Good! :yum:

hows the fitment of the front lip? any gaps at all?

Thanks AK, as far as the fangs go no that's not part of the lip.. this sticks on just below that..

6spd, The fit is pretty good, but being that its flexible, its kind of a blessing and a curse at the same time.. I re-did some of the 3m tape that the lip came with, as the parts where it curves in towards the fangs wasn't sticking right.. That made it much better and cleaned up the little gap I had in that area.. Plus we has a short break of sunshine that heated the lip up and made it flex a little more and that seemed to help get itnto position.

looks good. that door handle is kinda bright.

Just curious... How much drop did you do? As in inches. Love the kit and the drop btw.

i just don't think it's possible to rice out a 370z..

you sir have confirmed this, sick Z.

actually looks pretty good.

Honestly, I have no idea.. I'm on Stance GR+ Coilovers, I dropped it super low, started scraping like crazy and raised it back up a bit..

which doesn't even matter now because one of my FI CF mufflers is kinda smashed into an oval shape now from a bad dip in the road a few weeks ago. :mad: Never really noticed how bad it was till this past weekend.. but thats another thread..

I can measure my front/rear ride heights if you'd like...

The JP lip looks good with the Nismo sideskirts. I've been thinking about adding the Nismo sideskirts too. :tup: I have one of the first JP lips on my 370Z.

WTF, my Z looks nothing like that! That profile pic makes me feel like my z is the chubby kid with the perpetual stain on his shirt. Must bite your steez... me likey.... lots. Congrats

When/if you have the time I'd appreciate it.

Looks great! :tup:

Anybody have pics of that lip in red on a red Z?

^^ Thanks

Hmm. Wonder how it would look molded to the bumper so the fangs blend in better...

loooooooooooooove that thick rear tire!!
Bad ***!!!

Nice! ZOTD worthy :D

looking mean as hell

Nice and clean. I like

Yep, I remember that, your thread made me pull the trigger on those pieces.. :)

Mad Props Liquid, i was planning the same thing but your car is freaking a$$!! :bowrofl:

Really nice man. Just put her away when you bush waking that grass down to size again. I'd hate to see her dirty ;) Very nice and well done on parts.

Very nice!

That looks great!!


DAN

Thanks for the compliments guys.:tup:

Schwing!!!!!

well guys.. got some bad news... the JP lip, after 1 day of hot sun and about 100 miles, has already started to fall off.. :( idk maybe thats just the way Urethane lips are but this really sucks.. the 3m tape on the sides and in the front near the fangs has peeled off the bumper and now have big gaps between the lip and body... And yes I made sure the area was perfectly clean, used alcohol on the area before I stuck it down..

http://i333.photobucket.com/albums/m...p/IMG_0097.jpg
http://i333.photobucket.com/albums/m...p/IMG_0098.jpg
http://i333.photobucket.com/albums/m...p/IMG_0099.jpg

not sure what I'm going to do, anyone have any ideas? is there a better adhesive I should be using? I feel like throwing this thing in the garbage..

:mad:

get some 3M VHB tape... :D can withstand up to 300F.

getting my 36yard roll tomorrow. :p

which one did you get? the 5952 or the 4941?

i got the 3M VHB 4611 45mil Gray 1/2" x 36yards. was like $45 with shipping.