Nissan 370Z Forum
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exterior & Interior (http://www.the370z.com/exterior-interior/)
-   -   Clock removal-gauge replacement (http://www.the370z.com/exterior-interior/12619-clock-removal-gauge-replacement.html)

bucketman 12-23-2009 10:29 PM
Clock removal-gauge replacement
 
Has anyone removed the clock and replaced it yet with a gauge? If so is there a write up on how to remove the clock? I have searched but can't find anything. I am looking to put an oil pressure gauge in, possibly swap to a boost gauge after the car is FI.

Modshack 12-24-2009 11:07 AM
I know Lou (Fusz) was doing this with a Defi gauge. I don't think he actually did it himself, and not sure his car is back from the turbo install for pics (which I have requested)

FuszNissan 12-24-2009 11:13 AM
It's not finished yet, waiting on a line form Goodridge. I am replacing the cluster with all DeFi gauges. It will have Boost, Oil Temp, and EGT Temp. All amber and 60mm gauges. When it's complete I will post some pics I promise Mod. All ran by a DeFi Link controller.
Should be fun.

Modshack 12-24-2009 11:16 AM
Quote:
Originally Posted by FuszNissan (Post 340477)
When it's complete I will post some pics I promise Mod. All ran by a DeFi Link controller.
Should be fun.
Looking forward to seeing it!...:tup:
The Defi Link set-up is really nice..

bullitt5897 12-24-2009 12:55 PM
I will be replacing mine as well ;) I will post an update in Jan when my install starts for my TT

G Fo12ce 12-25-2009 12:50 AM
Quote:
Originally Posted by FuszNissan (Post 340477)
It's not finished yet, waiting on a line form Goodridge. I am replacing the cluster with all DeFi gauges. It will have Boost, Oil Temp, and EGT Temp. All amber and 60mm gauges. When it's complete I will post some pics I promise Mod. All ran by a DeFi Link controller.
Should be fun.
Fusz,

Do those hoods on top of the gauges to sheild them from glare come off? Can they be reused on the DEFI gauges.

MightyBobo 12-25-2009 06:20 AM
From having to fiddle with mine, they almost seemed like they were only on there with double sided tape, so I wouldnt doubt it lol.

G Fo12ce 12-25-2009 06:30 PM
Lol I see, well that's good they are reuseable. Could be all naturale adhesive, boogers!!!

spearfish25 03-07-2010 05:23 PM
Has anyone done this yet? I'd love a DIY.

CBRich 03-07-2010 08:22 PM
I believe Altered Atmosphere did it on Lou's car, correct?

vipor 03-07-2010 08:38 PM
I wonder how hard it would be to swap out a gauge after the initial install. Say I want to replace the gauges now, but later (when appropriate) add a boost gauge.

theDreamer 03-07-2010 08:40 PM
Quote:
Originally Posted by CBRich (Post 433436)
I believe Altered Atmosphere did it on Lou's car, correct?
Yep, they swapped all three out, they said they were going to post of some pictures of some info on what they did but no info yet.

NYBladeZ 03-07-2010 08:50 PM
I don't believe there is a write up but it has been done using Defi gauges

DIGItonium 03-07-2010 10:04 PM
From what I was told, it requires removal of the entire dash to get to the center cluster. Unlike the 370Z, the 350Z was much more straight forward. :(

kdoske 03-07-2010 10:14 PM
Quote:
Originally Posted by DIGItonium (Post 433617)
From what I was told, it requires removal of the entire dash to get to the center cluster. Unlike the 370Z, the 350Z was much more straight forward. :(
I remember reading the same thing. They said they had to pretty much remove the entire front dash to get them in. Sounds like it might have to be a weekend project.


All times are GMT -5. The time now is 06:45 PM.
Page 1 of 4 1 23 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2