Installed touring seats into 2010 base and there is no power...need help!
 

I've seen a few threads about this already, with no apparent resolution. I recently purchase 40th seats off the forum and attempted to install them. I disconnected the battery and swapped the seats and reconnected everything. When I tried to move the seats, no power. I'm now stuck with 2 seats moved all the way up. If anyone has faced this issue, please let me know what you did to resolve it. Also, while I appreciate a good DIY, am rather weak in the electrical department so speak to me as if I'm 5 if you're talking about harnesses/bypasses/fuses. :confused::confused::confused:

Thanks in advance!!!!

Did your car have power seats?

Title indicated base model.... so no power seats. guess it is self-explanatory.

Title says base/sport touring, so I guess it is more confusing then self explanatory. A title like "Installed sport touring seats into 2010 base and there is no power" would have not prompted my question.

If it is a base, then I believe power seats will not work.

Sorry for the confusing title. Yes. It is a base with no leather/power seats to begin with. I read that the 2011's & 12's had the power and just assumed mine did when I purchased, since it has the power connection under the seat.

Since the connector is there, you may be able to track down the other end and connect to power. FSM (link in my sig) has wiring diagrams, connector pinouts, wire colors, etc.

Edit: There will probably be some relays that will need to be installed as the BCM cannot supply that much power. FSM should have details.

....

Thanks SouthArk and cooltoy. I think it's way out of my scope to tackle...gonna have to take it to the stealership :crying:

Found that the fuse and relay under the hood are there. There is one more relay according to the diagram behind the dash that I will be looking for today. If that's there, I'm out of ideas. Is there any place other than the dealer I should take it? Car audio shop or something?