Help finding part
 

Managed to break the internal passenger side handle pully that opens the door, outside still fine, it's just a small ball bearing connected to a plastic swivel piece attached to the door panel, the plastic holding the bearing is what broke.

How would I go about getting that plastic piece replaced? I could do it myself but I have no idea where to look for it? Any ideas?

Thanks.

If you had a picture, that might help.
I have a bunch of parts, but not sure if that may be one of them.

Going to take a picture today when I get a chance, thanks.

You should be able to find the part and associated part number in the FSM (link in my sig) or on Courtesy Parts' web site.

In re-reading your post, I'm assuming that what you broke is actually a portion of the handle itself. At first, I thought the ball actually separated.

If that's the case, I've got the entire door handle assembly. Since it's the passenger side, it's in perfect condition.

http://i244.photobucket.com/albums/g...EF2A344136.jpg
http://i244.photobucket.com/albums/g...91A1E0EED7.jpg

The second pic TreeSemdyZee, that's it! Thanks for your research, took a pic of mine and afterwards took a closer look at the assembly and how it worked just a few mins ago. Well, looks like the bearing just came out and did little damage, popped it back in and it's working. After spending hours yesterday trying to get some 6.5" speakers in there, more of trying to find a spacer that would work (3 hours, 3 different stores) my mind wasn't quite right, if I was calm enough I would of figured it out myself, lesson learned again, not the first time!

For anyone looking to install the Lancer OPTI6PM mid in there Z, the spacer I found was a GM speaker adapter, the OPTI6PM needs a good 6.75" spacer, 6.5" is too small.

Thanks for all your help guys, love this place!

Glad I could help.


Sent from my iPhone using Tapatalk