iJDMTOY LED 4th Brake Light
 

Installed the iJDMTOY LED 4th Brake Light today! :happydance:

Very easy install, connecting 4 wires to brake light.

Stock Red --> New Green
Stock Green --> New Red
Stock Black --> New Black
Stock Green/White Reverse --> New White

http://i1209.photobucket.com/albums/...7/IMG_0902.jpg

http://i1209.photobucket.com/albums/...b2bb55b21d.jpg

http://i1209.photobucket.com/albums/...6d3c222c48.jpg

http://i1209.photobucket.com/albums/...7/IMG_4616.jpg

http://i1209.photobucket.com/albums/...45006b18ce.jpg

Nice Job! :tup:

looks good
where exactly do the wires connect up at, do u have to take rear matting up, or add extra wire to reach taillamp, take tailamp out to do it?
any pics of install

Wires run from 4th brake light up behind the bumper and poke through a small hole that is visible after taking off driver side tail light. Yes, just have to take out the mats and the plastics around the trunk. Splice the wires from taillight and connect supplied wires. Tape it up and reinstall. Very easy.

How to install Nissan 370Z LED rear fog lights reverse lights

Link to directions ^

last question,,if i use the stock rear foglite already there is it the same type hookup..

It is a direct replacement, if you're talking about using the wire harness right next to the fog light then no I don't believe you can wire to that because you need the positive from the tail light because the new LED fog light actually functions as a brake light getting brighter when braking. As well as functional reverse lights. Hope this helps

thanx, i think i will just buy the setup u did and then theres no guessing, blowing fuses, etc.

just tried to order one and they are out of stock and no idea when they will get more.:mad:
between this and waiting 3 mos. for FI:eek:

iJDMTOY is selling them on amazon, maybe try there!

no luck, only smoked ones.....patience is a virtue for Z parts it seems:icon14:

http://www.amazon.com/dp/B0141L44DM/...S6HLYS7E&psc=1

6 left in stock on my interwebs :confused:

comes up SMOKED lens not RED lens,,thanx for trying:hello:

Do we have to do everything for you? =) You can select the non smoked version from the same product page.

:rofl2:

What he said :tup:

i just called iJDMtoy, they are out of stock for 3-4 weeks, order one on Amazon and it is a backorder, that is why u cant order a red one on JDM direct:hello:

im gonna wait a month and get directly from JDM, they offer a 12% discount for veterans upon proof of service:driving:

I installed mine over the weekend and a comedy of errors happened.

First off, I used the instructions that came with the part. That was mistake number one. Here is how the instructions say to wire:
http://www.ijdmtoy.com/BLOG/Showcase...ear-fog-26.jpg

Everything is correct except the white wire. As the OP posted, and for some reason forgot the thread existed even though I posted in it, the white wire goes to the green and white factory wire.

After hooking everything up and having my wife come out and hit the brake and put it in reverse I finally looked here and saw the error of my ways.

That evening as I am moving the cars back in the garage I notice that my left rear running light is out. Mistake number two and fanfuckintastic. Sunday afternoon I start ripping everything out again to check all the wiring. Sure enough, one of the connections came loose. After neatly packing the wires back together, I used roughly 6000 linear feet of electrical tape to make sure it doesn't come loose again.

I bought the smoke lens option. If anyone is interested I can take some pics of day and night so you can see.

The lesson here is use this thread as the install instructions.

Side note: There is a bracket the is connected to the frame that holds the bottom of the bumper in place. I found it easier, albeit a little more time consuming to remove the bracket. It is held into place by three of the plastic push clips. By removing the bracket you are able to get a socket onto the nuts that hold the reflector in place. The factory put roughly 15 metric tons of locktite on the two nuts holding it in place, thus my need to remove the bracket.

hi. i have question. while i open the tail light and wire everything, everything light up, work like it suppose to.

but after i put evething back, the tail light itself not light up. like when you start the car and turn on headlight. no tail light. brake and reverse is ok.
what should be checked.

you're probably shorting a connection when you put the tail light back in place. Double check and make sure there's no bare wires anywhere

Damn, I like this more then my Eco-R light

i just checked. no bare wires. i have cut wires short a little bit. that what you mean. every wire connect. only no tail light (both) not on. i just think somewhere else loose but not sure

I bought my foglight from amazon, but I've noticed that I'm missing one bolt on the back where the nut would be. Was it yours like that too?

I love my iJDMtoy light. Attaching to the harness was tricky because of so little play in the stock wiring. But it looks awesome.

My evo r light just burnt out I think... it started flashing wildly and now it won't turn on soo time to try this one.