Female end of the 2013+ DTRL
 

Hey guys Looking for the Female end of the 2013+ DTRL harness, does anyone know where I can purchase them without having to buy the whole DTRL assembly? Looks like picture below.
http://www.the370z.com/members/hngng...54610029-1.jpg

If your Z is NOT equipped with that connector?

You could look for a replacement male/female 2 wire connector.

Or you can also just cut that connector off and crimp on female connectors and crimp on male connectors coming from ground and power.

make sure you tape them up real good.

Thats the more ghetto way of doing it but will work.

*** Warning ***

IF none of what I said made any sense?

Please have a local guy with auto electrical experience wire them in for you.

Im just presuming you have some knowledge :ugh2:

You can find OEM connectors but you usually have to buy them in lots of 100 or more.

You can find weather/water-proof connectors at most electronic supply houses (eg, DigiKey). Find a male/female pair that will handle the current, cut the old connectors off, and splice the new ones in. Similar to Trips suggestion but less ghetto.

Look into WeatherPack connectors. :tiphat:

I haven't dealt with WeatherPack, but the connectors look like what is needed.

If you don't have any experience assembling connectors, get the pigtails.

Pigtails will save you from buying the special crimp tool. If that't the chosen route, look for a similar item from Amazon. These are very reasonably priced.

http://www.amazon.ca/E-TING-Waterpro...CG8ERJ01BR4K1V

http://ecx.images-amazon.com/images/...L._SL1000_.jpg

I have a 2014 so the car is equipped with the harness, however, I'm trying to create a custom DTRL and didn't want to splice into the male end. So I was hoping they sell the Female end, that way I can just wire it to the female end and then plug it into the male end and call it a day. But thank you all your suggestions guys, I will look into them, maybe I'll find another way to do what I want. thanks again!