Nissan 370Z Forum - Cleaning the Tommy Kaira Knob

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Exterior & Interior (http://www.the370z.com/exterior-interior/)

- - Cleaning the Tommy Kaira Knob (http://www.the370z.com/exterior-interior/107293-cleaning-tommy-kaira-knob.html)

RAMOS

09-11-2015 09:42 PM

I just used a small amount of loctite on the threads and it stays in place.

Dragon_Ball_Z

09-11-2015 10:41 PM

Quote:

Originally Posted by birdman71 (Post 3307195)

actually no i knew that it happened before i bought it

depointfive0 explqined that before i bought it

and ive grown to like it :tup:

Why else buy it lol use it :tiphat: :driving:

I will look into that one :) honestly i was thinking about putting a washer down there and then it would sit right

To not destroy it lol

-Raj

DEpointfive0

09-12-2015 01:28 AM

CLEAR COAT IT. I have owned more knobs than all of you combined. Spend $10-20 and get it cleared with a high quality clear.

Kenwoodturbo

09-12-2015 08:03 AM

Another option to get it straight that I posted in old thread is. I went to lowes and bought some 3/8" I'd aluminum tube and cut a taller than own spacer. Once cut and it was close then I just lightly sanded until it lined up perfectly when tight. I haven't had an issue in 3 years. I figured this was better option at the time so that over time it wouldn't loosen as it could if you loctite or thread seal it.

Hotrodz

09-12-2015 08:52 AM

I bought another shift knob for go and will use the turtle for show!!!

TriNismo

09-14-2015 12:18 AM

Quote:

Originally Posted by DEpointfive0 (Post 3307254)

CLEAR COAT IT. I have owned more knobs than all of you combined. Spend $10-20 and get it cleared with a high quality clear.

Any recommended quality brand?

Sent from my iPhone using Tapatalk

DEpointfive0

09-14-2015 04:52 AM

Quote:

Originally Posted by TriNismo (Post 3308419)

Any recommended quality brand?

Sent from my iPhone using Tapatalk

Not a painter, sorry. But BASF, DuPont should work

BoneZ

09-14-2015 06:10 AM

Quote:

Originally Posted by trinismo (Post 3308419)

any recommended quality brand?

Sent from my iphone using tapatalk

ppg

All times are GMT -5. The time now is 07:40 AM.

Page 2 of 2

Show 40 post(s) from this thread on one page