Seat belt removal and Install
I am no way liable for anyone messing anything up and only doing this as the process i took to change my belts :roflpuke2:
OK so you will need a 14mm socket and a 10mm socket , Phillips screw driver plus a pry tool Total time i would say 1.5 hr to 2 hr depending on skill If you have removed rear speakers you have already done about 3/4 of the work already Here is the start point http://zmanelite.smugmug.com/Other/S...8_103126-L.jpg Remove all 4 pins on both sides http://zmanelite.smugmug.com/Other/S...8_103229-L.jpg After you can pop the rear section off http://zmanelite.smugmug.com/Other/S...8_103349-L.jpg Remove carpet and floor , once you do that you can pop these pieces off http://zmanelite.smugmug.com/Other/S...8_105006-L.jpg Remove these 10mm bolts located in these holes 1per side of car http://zmanelite.smugmug.com/Other/S...8_105248-L.jpg Now move to the front and remove these carpet panels , they are a bitch but will pop up http://zmanelite.smugmug.com/Other/S...8_105849-L.jpg Remove the 4 clips that are toward the front of the car 2 per side http://zmanelite.smugmug.com/Other/S..._110129-XL.jpg Remove 2 screws with a Phillips screw driver 1 per side http://zmanelite.smugmug.com/Other/S...8_105936-L.jpg Now take off the panels and the plastic on the strut bar slides out http://zmanelite.smugmug.com/Other/S...8_105904-L.jpg Remove Door Kick panels they just pry up and side panels where speakers go http://zmanelite.smugmug.com/Other/S...8_110246-L.jpg Now you can wiggle this part out and remove , it slides backwards and when putting back together this should be the first part installed http://zmanelite.smugmug.com/Other/S..._111111-XL.jpg These are a little hard to take out and i take no responsibility of damage to the plug or belts I removed them by prying with a flat head , to reinstall them on new belts they are also a bitch and need a little force and wiggle at the same time http://zmanelite.smugmug.com/Other/S...8_112050-L.jpg Now remove the top 10mm http://zmanelite.smugmug.com/Other/S...8_112214-L.jpg And bottom 14mm http://zmanelite.smugmug.com/Other/S...8_112224-L.jpg Get the cover off the top and remove the 14mm also http://zmanelite.smugmug.com/Other/S...8_112356-L.jpg Last 14mm is at the bottom http://zmanelite.smugmug.com/Other/S...8_112443-L.jpg Now all you have to do is remove belts and replace with new ones , reverse the process and you are good to go http://zmanelite.smugmug.com/Other/S...8_125420-L.jpg http://zmanelite.smugmug.com/Other/S...8_125439-L.jpg |
Sweet!
|
Will the dye potentially rub off? Stain clothing?
|
Dont think so as the web is made that color so its not just like the stock ones got dyed
|
Is the quality the same as the original belt?
Thanks Darel |
Yes sir !
The company that did these do other OEM stuff You can find all the info on this thread Evo-r hooked it up http://www.the370z.com/exterior-inte...or-change.html <----------------Here |
Good write-up.
|
What number is that on the color swatches?
Very nice!! Im next:tup: |
Quote:
This orange is more like a HI Vis or neon orange so it's bright |
Damn the seat belts looks great!!!! :drool: thanks for the DIY
|
Nice!! Ok so dudes, is there a thread on how to replace/remove the air bag module in the Z, and if so can someone direct me to it pretty please???
|
Seat belt connector that original poster said was a bitch to remove....this is how service manual says to take them off.https://i.imgur.com/i37M8Ls.jpg
|
Quote:
|
Yeah definitely pry at where the picture shows, on the side of that little box towards the wiring. I was prying at the other side because it was easier to get my tool at it but it was not wanting to go up, as soon as I went to the other side it was like 1 second POP, and it came off with ease.
|
Repped. Thanks for sharing.
|
All times are GMT -5. The time now is 03:37 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2