will you be making one for the non touring radio/bezel? the base radio/dash kit doesnt go "out" as in towards the inside of the car as much. therefore, it looks ugly when you use a base radio/dash kit with the navigation bezel

example, you can see that the bottom has a "chin" that extends over the radio
https://lh3.googleusercontent.com/-1...800/Teaser.JPG
http://img.tapatalk.com/20a36973-160b-c8de.jpg

that looks nice!

Gauge Display
 

I'm thinking screen 1 needs:

A/F-1 | A/F-2 | Boost
Oil_PSI | Fuel_PSI | EGT

Remove the clock from the triple-gauge stock setup on the dash, move the DC_Voltage gauge over one to where the clock was, put Coolant_Temp in the center (next to oil_temp)

The most important gauges have to be air/fuel mixture for each bank--that's what avoids a melt-down. Then boost--everyone wants to know boost.

Oil_Pressure is highly important for the turbo bearings, Fuel_Pressure to make sure the fuel pump is able to deliver enough fuel to the rails, and of course Exhaust_Gas_Temperature to avoid a melt-down.

Screen 2 can show other things usually set by laptop (for convenience) such as timing advance, torque, and other things NOT displayed by other gauges-RPM, speed, coolant temp-those are on the dash.

If there is an order can be done, as its not an issue.

We do offer customization different from out of box configuration as per your needs :tiphat:

This looks FANTASTIC! Something I'd be all over if I didn't have the OEM nav. Wow! Great job!

^kit 2 is for ppl with oem nav screen.

Sent from my Nexus 6 using Tapatalk

I'm thinking that's what everyone needs...at least if they have boost (which would be the reason for buying it in most cases) and it should be the default setup.

Waiting to hear feedback from current owners on Kit-2. I have the Navigation system and want sleeper integration.

I believe it will fit what we have as we made as per the cubby hole lid which is same for both

Number of readings are same even if boosted or not, but people asking for FI sequence boost is there in first screen.

However custom sequence can be done but there will be some designing charges.

Hey guys I sent you a chat message have a few questions for ya

Sent from my SM-N910T3 using Tapatalk

i am planning on getting this for my Z and was wondering if anyone has received the Carbonsignal Custom GTR Style Display Screen yet? If so, any issues on the installation? Where did you make the electrical connection? Appreciate any comments from those who have it.

Almost all are shipped :)


www.carbonsignalauto.com

http://i163.photobucket.com/albums/t...t/DSC00826.jpg

http://i163.photobucket.com/albums/t...t/DSC00827.jpg


http://i163.photobucket.com/albums/t...s/DSC_1157.jpg


My install

Looking good. Bit strange looking seeing from right side.

Did you install rear cam with it as well or is with head unit as its better with screen as will work even if head unit if switched off


www.carbonsignalauto.com

dang i want that rear bar! looks nice!!

i just need to make a few more adjustments

http://www.the370z.com/members/tonyt...gtr-gauges.jpg