Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Exhaust/Intake (http://www.the370z.com/exhaust-intake/)
-   -   Motion Lab has everything you need from Berk Tech available and more!! (http://www.the370z.com/exhaust-intake/61298-motion-lab-has-everything-you-need-berk-tech-available-more.html)

Motion Lab 10-02-2012 10:40 AM

Motion Lab has everything you need from Berk Tech available and more!!
 

Motion Lab Tuning has the entire line of Berk Technology exhaust components available for your 370z/G37. Berk high flow cats are the ideal solution for you guys looking for a cat that will stand up to the higher exhaust temperatures of your force fed VQ. Designed with performance in mind, Berk made sure that these cats would only present a minor level restriction when compared to the factory system. The high flowing design will allow you to extract the most from your setup while remaining emissions legal in 49 states! Currently our buddy Neo187H has a set of these cats hoping the bump in back pressure will yield him a bit higher boost in the top end.

Features of the cats are:
  • Metallic substrate spun catalytic converters
  • OBD-II & 49 state compliant
  • Fully stainless steel construction
  • Utilizes Berk's custom soft crush graphite gaskets to insure a proper seal
Test pipes are also available!


Backed by years of experience in the racing industry and thorough R&D, the Berk team has figured out a way to produce a factory-like cat back that actually out performs the already excellent factory unit. Due to it's design, the exhaust is nearly silent under cruising situations but will wake up under heavier load. There are average gains of about 14-18 hp with this system as stated by Berk.

Features of the Berk Cat-back are:
  • Dual 2.5" cat-back with seperate piping for the left and right banks
  • 100% stainless steel contruction
  • Fully TIG welded for exeptional strength and hand assembled
  • Utilizes factory mounts for easy ,100% bolt on fitment


PM us for pricing!



Thank you,
Steven Watson
StevenW@motionlabtuning.com
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 10-05-2012 03:29 PM

Intake kits
 

AEM Induction has a full line of cold-air intake kits for the 370z. Available for the base/touring models and Nismo specific fitment. All of the intake kits are equipped with electronically tuned sensors that adjusts the MAF sensor to make sure that it is constantly reading proper values. This allows the tubing diameter to be much larger without causing issues prior to tuning. Offered in both polished and gunmetal finishes, these intake kits look and perform just like you would expect an AEM product to!

Features of the Base/Touring kits:
  • Dryflow Oil-free synthetic filter
  • Durable filter media is washable allowing long intervals between cleaning (AEM claims 100k miles)
  • Lifetime limited warranty
  • Improved throttle response
  • 9.67 hp increase @ 7100 rpm! Check AEM's site for the plot

The Nismo fitment kit includes all of the same features as above including:
  • Modified filter location making use of the Nismo's increased air inlet area
  • 19.7 hp increase @ 7100 rpm! Check AEM's site for the plot



The induction specialists at K&N also have an intake offering for the 370z community in the form of their Typhoon system. Sporting K&N's excellent Million Mile Warranty, you know that you will be able to trust this system for the entire life of your vehicle.

Features of the 69 Series Typhoon system:
  • Ram air design brings power on earlier in the band
  • Supplied with heat shields that also help direct air into the filters
  • High quality aluminum mandrel bent tubing with K&N's long lasting satin silver finish.
  • 14.2 hp increase @ 5600 rpm! Check out K&N's page for the plot.

PM us for pricing!



Thank you,
Steven Watson
StevenW@motionlabtuning.com
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 10-06-2012 01:00 PM

Thanks everyone. Keep those PM's coming

Thank you,
Steven Watson
StevenW@motionlabtuning.com

Motion Lab 10-08-2012 10:04 AM

We also have exhausts systems and engine parts from HKS, Invidia, Berk, Tanabe, and GReddy! Everything you need to get your Z to sound and perform better than ever.

Thanks for the PM's so far everyone!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 10-12-2012 01:54 PM

It is Friday October 12th which means we will be in the office from 9AM-6PM EST. Stillen intakes available from Motion Lab now. All the best parts from the top brands. We only recommend the best! Contact us with any questions and we will be happy to assist.

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 10-18-2012 09:12 AM

It is Thursday October 18th which means we will be in the office from 9AM-6PM EST. Stillen intakes available from Motion Lab now. All the best parts from the top brands. We only recommend the best! Contact us with any questions and we will be happy to assist.

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 11-07-2012 05:33 PM

It is Wednesday November 7th which means we will be in the office from 9AM-6PM EST. Stillen intakes available from Motion Lab now. All the best parts from the top brands. We only recommend the best! Contact us with any questions and we will be happy to assist.

We just returned from our trip to SEMA. Lots of great new products on the horizon, let us know about any questions you might have about products currently available or to be released in 2013!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 11-16-2012 02:38 PM

It is Friday November 16th which means we will be in the office from 9AM-6PM EST. Stillen intakes available from Motion Lab now. All the best parts from the top brands. We only recommend the best! Contact us with any questions and we will be happy to assist.

We just returned from our trip to SEMA. Lots of great new products on the horizon, let us know about any questions you might have about products currently available or to be released in 2013!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 11-21-2012 09:28 AM

It is Wednesday November 21st, we will be in the office from 9AM-6PM EST. Stillen intakes now available from Motion Lab. All the best parts from the top brands. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holiday season everyone!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 12-06-2012 10:26 AM

It is Thursday December 6th, we will be in the office from 9AM-6PM EST. Stillen Performance parts available now! ARK, GReddy, HKS, BERK Technologies, DeatschWerks, SEIBON, SuperPro, and Cusco available now... just to name a few. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holidays everyone! Motion Lab tuning gift certificates available in any denomination!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com

Motion Lab 12-14-2012 05:14 PM

It is Thursday December 6th, we will be in the office from 9AM-6PM EST. Stillen Performance parts available now! ARK, GReddy, HKS, BERK Technologies, DeatschWerks, SEIBON, SuperPro, and Cusco available now... just to name a few. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holidays everyone! Motion Lab tuning gift certificates available in any denomination!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com
www.facebook.com/MotionLabTuning

Motion Lab 12-20-2012 09:06 AM

It is Thursday December 20th, we will be in the office from 9AM-6PM EST. Stillen Performance parts available now! ARK, GReddy, HKS, BERK Technologies, DeatschWerks, SEIBON, SuperPro, and Cusco available now... just to name a few. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holidays everyone! Motion Lab tuning gift certificates available in any denomination!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com
www.facebook.com/MotionLabTuning

Motion Lab 01-05-2013 10:43 AM

It is Saturday January 5th, we will be in the office from 9AM-6PM EST. Stillen Performance parts available now! ARK, GReddy, HKS, BERK Technologies, DeatschWerks, SEIBON, SuperPro, and Cusco available now... just to name a few. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holidays everyone! Motion Lab tuning gift certificates available in any denomination!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com
www.facebook.com/MotionLabTuning

Motion Lab 01-08-2013 11:31 AM

It is Tuesday January 8th, we will be in the office from 9AM-6PM EST. Stillen Performance parts available now! ARK, GReddy, HKS, BERK Technologies, DeatschWerks, SEIBON, SuperPro, and Cusco available now... just to name a few. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holidays everyone! Motion Lab tuning gift certificates available in any denomination!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com
www.facebook.com/MotionLabTuning

Motion Lab 01-10-2013 01:05 PM

It is Thursday January 10th, we will be in the office from 9AM-6PM EST. Stillen Performance parts available now! ARK, GReddy, HKS, BERK Technologies, DeatschWerks, SEIBON, SuperPro, and Cusco available now... just to name a few. We only recommend the best! Contact us with any questions and we will be happy to assist.

Happy Holidays everyone! Motion Lab tuning gift certificates available in any denomination!

Thanks,
Alex Goodwin
AlexG@motionlabtuning.com
www.facebook.com/MotionLabTuning


All times are GMT -5. The time now is 06:08 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2