Nissan 370Z Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Exhaust/Intake (http://www.the370z.com/exhaust-intake/)
-   -   NEW from AMPLIFIED:TAKEDA/AFE SHORT RAM INTAKE for NISSAN 370z (http://www.the370z.com/exhaust-intake/5007-new-amplified-takeda-afe-short-ram-intake-nissan-370z.html)

kdo2milger 08-01-2009 08:27 PM
Quote:
Originally Posted by LOU@AMPLIFIED (Post 133384)
thank you for the pictures ^^^. I really like mine on my G37.

TAKEDA explained as to why they decided to make a small sheild instead of the full heat shield.

The heat generated by the radiator hose next to the intake on the passenger side was where the heat soak was coming from when they were testing and doing dyno runs. Only the passenger side was getting heat soak so they decided to make a small shield to minimize the heat and sure enough, after that cover they saw better gains while doing the dyno

I also did some of my own testing. I have the magden computer on my car and i was testing the AIR INTAKE TEMPS while driving to san diego. The air intake was typically 20 deg hotter than outside temp just like the stock air box on cruising speed. Once i stepped on the throttle, the air intake dropped 10 deg within seconds.

Here's some pictures of the TAKEDA installed on my G:tup:

http://i642.photobucket.com/albums/u...s/IMG_0032.jpg
http://i642.photobucket.com/albums/u...s/IMG_0048.jpg
http://i642.photobucket.com/albums/u...s/IMG_0049.jpg
sorry all i see is fluffed pillows...zzzzzzzzzzzzzzzz...zzzzzzzzzzzzzz....zzz zzzzzzzz :yawn:

frost 08-01-2009 08:30 PM
I didn't see a car in the first pic.

TBSS2008 08-02-2009 08:56 AM
Thanks your definetly going to love the intake. Just a heads up when I disconnected my battery and reconnected it the automatic roll down feature on the windows got disabled. If your windows dont roll up automatically when you shut your door after reconnecting the battery perform the following steps (I almost took my car in thinking I blew a senors or something).

If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.

kdo2milger 08-02-2009 10:28 AM
Quote:
Originally Posted by TBSS2008 (Post 134271)
Thanks your definetly going to love the intake. Just a heads up when I disconnected my battery and reconnected it the automatic roll down feature on the windows got disabled. If your windows dont roll up automatically when you shut your door after reconnecting the battery perform the following steps (I almost took my car in thinking I blew a senors or something).

If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.
thats odd, i thought it was a factory default setting...i'll do the same then, thanks :tup:

LOU@AMPLIFIED 08-03-2009 02:41 AM
thank you for the orders

2 left an very cheap price:tup:

Caravanshaka 08-03-2009 12:22 PM
Guys, if you are thinking about an intake this price is HARD to pass up.

For me, it was intake and sleeping on the couch, or no intake and sleeping with the wife...I'm sticking with stock intakes for now :(

theDreamer 08-03-2009 12:23 PM
Sorry to hear that. :(
I will be getting a baseline dyno today and a follow up after the intake is installed, so keep a look out for numbers. :)

Caravanshaka 08-03-2009 12:25 PM
Quote:
Originally Posted by theDreamer (Post 136183)
Sorry to hear that. :(
I will be getting a baseline dyno today and a follow up after the intake is installed, so keep a look out for numbers. :)
nice, looking forward to seeing some 3rd party dyno numbers on this intake.

LOU@AMPLIFIED 08-03-2009 01:25 PM
Quote:
Originally Posted by theDreamer (Post 136183)
Sorry to hear that. :(
I will be getting a baseline dyno today and a follow up after the intake is installed, so keep a look out for numbers. :)
Please keep in mind that the ECU has to learn the new intake. Reset your ecu after install, drive it for about 150 miles before you dyno, Hopefully you do more than 3 pulls also. From my experience with the G37 community, if these process is not followed, you won't see the true numbers.

thanks and i can't wait to see your dyno numbers:tup:

theDreamer 08-03-2009 01:28 PM
Oh, I do not even have the intakes yet. ;)
Dyno run today and probably will not get back onto the same dyno until the end of the week or early next week. Is there a difference in doing a battery unplug for a reset and just letting the car naturally learn the new part?

Edit: Lou, will I get a tracking number for my intakes?

import111 08-04-2009 11:26 AM
I can't wait to see the power gains. I am debating between this intake and the HKS.

LOU@AMPLIFIED 08-04-2009 02:43 PM
Anymore takers? price goes back up after i sell the last 2 we have in stock :tup:

ZforMe 08-04-2009 03:48 PM
Ill take a PM.

LOU@AMPLIFIED 08-04-2009 06:40 PM
Quote:
Originally Posted by ZforMe (Post 137777)
Ill take a PM.
you got PM:tup:

bucketman 08-05-2009 12:50 AM
pm to 70769?

kevr6 08-05-2009 08:25 AM
PM TO 30101 Please.

LOU@AMPLIFIED 08-06-2009 03:31 AM
all price request pm'd:tup:

M.J. 08-06-2009 03:33 AM
Okay Lou, order placed. Thanks for the great price to Hawaii. Keep me posted on the availability of the revised Invidia Exhaust please.

kdo2milger 08-06-2009 05:11 AM
I got mine from Lou yesterday, and did a little writeup with some pics and a short video here...

Thanks Lou :)

http://www.the370z.com/intake-exhaus...installed.html

LOU@AMPLIFIED 08-06-2009 05:25 AM
Quote:
Originally Posted by kdo2milger (Post 140111)
I got mine from Lou yesterday, and did a little wrieup with some pics and a short video here...

Thanks Lou :)

http://www.the370z.com/intake-exhaus...installed.html
Wow that was quick..lol I thought its not coming in till the 6th but if it came in early, even better.

Glad you like em. Thanks again and let me know if i can help you with any other parts, i'll be more than happy to help on the best pricing possible.

Remember, if you do the dyno, Let your ecu re learn the intake and dyno them after a few hundred miles after install:tup:

kdo2milger 08-06-2009 05:28 AM
Quote:
Originally Posted by LOU@AMPLIFIED (Post 140114)
Wow that was quick..lol I thought its not coming in till the 6th but if it came in early, even better.

Glad you like em. Thanks again and let me know if i can help you with any other parts, i'll be more than happy to help on the best pricing possible.

Remember, if you do the dyno, Let your ecu re learn the intake and dyno them after a few hundred miles after install:tup:
i will most likely not a dyno today, but I want to stop by and see the place atleast...i would like to get one done before i put Tonys fi cbe on..so i plan to do one before the exhaust then one after...

theDreamer 08-06-2009 09:04 AM
Mine are in also, check my thread for pictures and Monday I will be going back for dyno results.

kdo2milger 08-06-2009 09:06 AM
Quote:
Originally Posted by theDreamer (Post 140200)
Mine are in also, check my thread for pictures and Monday I will be going back for dyno results.
looking forward to your results

JB1 08-06-2009 12:46 PM
Lou, am I too late for the good price? PM me a price if you can!

thanks

zZSportZz 08-06-2009 01:24 PM
PM please 20619...if still available.

LOU@AMPLIFIED 08-06-2009 07:40 PM
all pm's sent for price request.

thank you for the orders, keep them coming, I have till saturday for this insane price deal:tup:

LOU@AMPLIFIED 08-07-2009 11:56 PM
anymore takers? :tup:

CCCLXXZ 08-08-2009 01:16 AM
PM wouldn't hurt

LOU@AMPLIFIED 08-08-2009 01:42 AM
Quote:
Originally Posted by CCCLXXZ (Post 143177)
PM wouldn't hurt
Pm sent

LOU@AMPLIFIED 08-10-2009 03:09 AM
still got a couple left at insane cheap price. I have some left over from the bbq and if i don't sell them by tuesday night, they are going back and intro price is done.

Hit me up if anyone else is interested:driving:

Caravanshaka 08-10-2009 07:35 AM
Quote:
Originally Posted by LOU@AMPLIFIED (Post 145327)
still got a couple left at insane cheap price. I have some left over from the bbq and if i don't sell them by tuesday night, they are going back and intro price is done.

Hit me up if anyone else is interested:driving:
Hope dreamer is able to post his dyno by then to show what the gains are :icon18:

CCCLXXZ 08-11-2009 12:33 AM
^

What I am waiting on as well, I may be placing an order tomorrow afternoon as dreamer is suppose to be on the dyno in the morning.

JvKintheUSA 08-11-2009 08:11 AM
Quote:
Originally Posted by LOU@AMPLIFIED (Post 141522)
all pm's sent for price request.

thank you for the orders, keep them coming, I have till saturday for this insane price deal:tup:
Can you PM me a price as well? Thanks!


All times are GMT -5. The time now is 08:01 PM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2