AEM Electronic Tuned Intakes Now Available! + 9.67rwhp & FREE S&H!!
 

http://www.aemintakes.com/search/images/AEM180w.gif

We are an authorized AEM Dealer. Buy authorized and be assured your intake includes FULL warranty and is 100% authentic AEM.

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Available for the 09+ Nissan 370Z in Silver and Polished Powedercoat Finish

http://www.aemintakes.com/images/l/AEM-41-1001C.jpg

http://www.aemintakes.com/images/l/AEM-41-1001P.jpg

Link to Dyno Chart

Link to Installation Instructions

Product Style: AEM Cold Air Intake System
Estimated Horsepower Gain: 9.67 HP @ 7100 RPM
Replacement Filter: 21-202DOSK
Street Legal In All States: No
Weight: 14.9 lb (6.8 kg)



TECH TALK:
Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU. AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.



Please PM/Post/IM/Call us for Special 370Z Member Pricing!

Thank you all for checking out these awesome new intakes!
Best regards,
AJ
ECS Motorsports

Any issue with relocating the MAFS to the front of the vehicle? Is it more susceptible to the elements (rain)? How about airflow issues with the MAFS too close to the filters? Otherwise, I really like this design.

edit: Very detailed install instructions.

pmm pricing please

Go on then , hit me

pm pricing to 95050 CA

Curious what the price is as well. PM me please :tup:

Still waiting on a response

shipped to 91011 plz

All PMs sent!

Locating the MAF closer to the intakes allows the ATI module to obtain a more accurate reading, at least that is my assumption.

AEM dyno tunes and tests all their intakes and this design is indeed innovative and effective!

Bump it up!

In stock!!

Hump day Bump!!

PM or call us today for the BEST pricing online, GUARANTEED!
We will not be undersold!

Thank you all for your business and for choosing ECS Motorsports!

Best regards,
AJ
ECSMotorsports.com
1-888-316-3669

Both colors in stock, ready to ship!!

Bunch in stock!!

We've got 6 intakes IN STOCK, ready to ship immediately!!

PM/Call for exclusive pricing or to order.

Regards,
AJ
ECS Motorsports

What is the reservoir in the middle of the picture for?

Send me pm with a price for the gray shipped to 29483.