Nissan 370Z Forum - Another oil filter for Stillen oil cooler sandwich plate thread

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - Another oil filter for Stillen oil cooler sandwich plate thread (http://www.the370z.com/engine-drivetrain/95246-another-oil-filter-stillen-oil-cooler-sandwich-plate-thread.html)

I have tried the K&N hp 1008, it didnt fit, tried the Bosch d3312 leaked alot, Mobil 1 m110 didnt work the only one that worked for me that was available in stock at oreillys was the wix 51381

Sent from my SM-G975U using Tapatalk

Observation: You could guys could try using a thinner thermostatted Sandwich plate. The Stillen one looks to be twice the size of others I have seen. I use a mix of parts and I can use any of the discussed filters (Mobil 1, Amsoil, K&N) and currently use the K&N HP 1008. I have used this one since the car was new. No Leaks. Easy to install with the hex nut welded to the back side. Just my thoughts.

Quote:

Originally Posted by VQ37 (Post 2937154)

You mean M1-108? That's the standard size for 370Z. Same size as KN HP-1008 except no Nut on end, so it may fit better wihtoiut the nut.

Quote:

Originally Posted by VQ37 (Post 2937154)

Hello all,

I know there are lots of threads that discussed about compatible oil filter for
Stillen oil cooler sandwich plate.

So far, I found two oil filters that works.

K&N oil filter HP-1008
Purolator Pureone PL10193
Mobil 1 M1-105

I know there is Fram filter too but I don't want to use that one.
It is hard for me to buy any of three filter above at local part store.
I saw one of post saying someone is using Mobil 1 M1-110 but not sure
if it's for Stillen sandwich palte.

Is anyone using Mobil M1-110 with Stillen sandwich plate?
Or does anyone use other oil filter besides oil filter that I mentioned?

Please reply if you do!

Thank you!!

If the Fram you are talking about is the Fram Ultra Synthetic oil filter then I would take that over the other two without thinking twice. The filter is well respected and favoured at BITOG forums. It has a synthetic media (not paper or any of that crap) and is backed by a wire. The pleats are nice and thick and the only other filters that even come close to it are Royal Purple and Amsoil.

Here, hopefully one of these fit? A good review and educational video even if you are not looking for a oil filter:

Quote:

Originally Posted by Zyonara91 (Post 3871895)

What's the Fram part number, FPS7317?

I'm using Purolator PL 14610 without issue.