Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Check Engine Code P2A00 (http://www.the370z.com/engine-drivetrain/61354-check-engine-code-p2a00.html)

pulser8 10-03-2012 10:28 AM

Check Engine Code P2A00
 
I had my car inspected two days ago and after I picked it up the check engine light came on. I have FI CBE, HFC, and K&N drop ins. These mods were installed over three months ago and I've driven roughly 6K miles without the engine code. Any ideas? I would think that an exhaust leak would have triggered the code long ago. During the installation process, I had to remove the passenger side header to remove one of the stock cats. It was tightened to spec however during reinstallation and a new gasket was used. I did notice that the car has seemed intermittently sluggish with acceleration for the last few weeks.

Any suggestions would be appreciated. Should I be driving the car?

takjak2 10-03-2012 01:47 PM

Wish I knew the answer. I've had this code for over a year now. All stock nismo exhaust. Nissan replaced my O2 sensor 3 times, then my ECU, and I still have the code.

pulser8 10-03-2012 02:13 PM

Thanks for the post. Have you noticed any change in performance?

Navyboy916 10-03-2012 03:14 PM

Clean ur mafs and reset the light make sure u clean them the proper way with the proper solution

Thorazine_IM 02-19-2013 02:32 AM

what do you use to clean mafs?

DEpointfive0 02-19-2013 02:35 AM

Quote:

Originally Posted by Thorazine_IM (Post 2173039)
what do you use to clean mafs?

MAF cleaner, LOL
It's $5-6 at any auto parts store

roy'sz 02-19-2013 03:34 AM

Quote:

Originally Posted by pulser8 (Post 1943011)
I had my car inspected two days ago and after I picked it up the check engine light came on. I have FI CBE, HFC, and K&N drop ins. These mods were installed over three months ago and I've driven roughly 6K miles without the engine code. Any ideas? I would think that an exhaust leak would have triggered the code long ago. During the installation process, I had to remove the passenger side header to remove one of the stock cats. It was tightened to spec however during reinstallation and a new gasket was used. I did notice that the car has seemed intermittently sluggish with acceleration for the last few weeks.

Any suggestions would be appreciated. Should I be driving the car?

Hmm. ...it could also be the fact that your car is leaning or riching out. My z is throwing P2a00 and P2a03. Bank 1 sensor 1 and bank 2 sensor 1....also misfire. So its time for a tune for me in the near future.

Thorazine_IM 02-19-2013 04:34 AM

so i attempted to program my 2013 370z ecu with hypertech. it started programming it but it never finished. and it keeps saying it couldnt read ecu. called hypertech and they said the unit is not made for 2013 and would only work for up to 2011s and that they havnt come out with a tuner for 2013s. now my engine is making this weird noise when ignition is put to "on" the noise sounds like a fan is on. or like when your laptop is loading a cd. something like that. and to make everything fun the car would not start. any input on this? im thinking hypertech messed up my computer? prolly needs to get reflashed by nissan??

SPOHN 02-19-2013 07:10 AM

I haven't had a chance to clean my MAF sensor. But I noticed this code only pops up when it's cold.

Navyboy916 02-19-2013 07:43 AM

You know that if the weather outside is to cold the car will notice this and throw a light due to the to low of temp. Just some insider tip

SPOHN 02-20-2013 01:18 AM

I do now.


All times are GMT -5. The time now is 09:35 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2