![]() |
Some problems in my Z
Hi guys
Without any introductions, I will tell you the story Today When I started my Z, it sound was louder than usual It almost sounded like I'm installed an exhaust but I'm not Other than this, when I was in my way to my work I noticed somethings The shifting should be soft when I am driving on D, but today there's something wrong I can feel it when my car shifting It feels like something pushing my car from behind every time the car shifts Also I was trying to stop at the red light and when I reached 20 mph, my RPM suddenly went down and came up again WTF !!! What's happened to my lovely Z ?? BTW my car is 7AT and it's milage is 64k miles |
Any codes? Sounds like your throttle may be off but there are plenty of other things it could be. I'd start with the easy stuff like checking your AT fluid, a code scanner, checking for loose wires/harnesses.
I would also clean the mass airflow sensors... I had a similiar issue in a Mazda when my MAF was dirty. It would stall or near stall and buck sometimes. |
Also being in Saudi Arabia, have you checked your filters? Again I'd clean the MAF because the climate may be impacting the car.
|
Mattp725
I will clean my two MAF's today and inform you if anything happened I have an appointment in the stealership ops I mean dealership this Sunday to check the tranny fluid What about torque converter ?? Is there any possibility that the problem could be from the torque converter ?? I am afraid that my gearbox is damaged |
I'm not very knowledgeable with torque converters but I would think that if you were in park it shouldn't idle higher if it is a damaged torque converter (but I could be wrong).
|
Check your engine oil levels!
|
I'd also try a simple ECU reset. Other odd issues people have experienced have been resolved by simply resetting the ECU (disconnect the battery for 10-20 mins and reconnect).
|
Guys I went to the dealer
They checked my car and told me " your car is just fine, your car's transmission is fine " So I will try to reset the ecu I hope it wil fix the problem |
Quote:
|
All times are GMT -5. The time now is 11:25 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2