Nissan 370Z Forum
Page 3 of 8 12 3 45 Last »
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Drop Engineering Engine Mounts (http://www.the370z.com/engine-drivetrain/41118-drop-engineering-engine-mounts.html)

NewYorkJon34 08-25-2011 01:20 AM
I don't get how the company that designed this piece has no review or pictures of the mounts installed.

KamiSpeed 08-25-2011 01:25 PM
Quote:
Originally Posted by XwChriswX (Post 1276812)
Are these something you can get separate? i.e. the engine or the tranny mounts only, or is it something you wanna upgrade both at the same time?

Secondly are these something that only work for MT's or would AT's benefit from these as well? Prolly the engine ones more than the tranny ones right??
it's something you can upgrade one by one, doesn't have to be both, and I'll ask about AT but I would assume the tranny mount is for MT only


Quote:
Originally Posted by kosstick (Post 1279571)
That sucks... Anyone know of anyone with mounts for the g37?? (i tried the myg37.com forums too, but the 370z.com seems to be more into more the modding scheme a little more)
Quote:
Originally Posted by NeverBoneStck (Post 1279788)
Any special price for me being the first G37 for the tran mount ??
Let me ask again and maybe they'll take more interest since I have more than one G37 interested

KamiSpeed 08-25-2011 01:28 PM
Quote:
Originally Posted by NewYorkJon34 (Post 1279800)
I don't get how the company that designed this piece has no review or pictures of the mounts installed.
im fairly sure they're a pretty new company so they might not have the resources to do that

NewYorkJon34 08-25-2011 01:42 PM
I really wanna get these mounts, they will be my next project after getting my headlights painted. How long of an install should this take...an hour?

KamiSpeed 08-25-2011 01:53 PM
Quote:
Originally Posted by NewYorkJon34 (Post 1280701)
I really wanna get these mounts, they will be my next project after getting my headlights painted. How long of an install should this take...an hour?
truthfully idk, all cars vary on location of engine mounts, so it might be a breeze or it might take a long time

NewYorkJon34 08-25-2011 01:59 PM
Do you think it will get in the way of my headers or if I decide to go with a gtm stg.1 S/C in the future?

wind.zero 08-25-2011 02:31 PM
Quote:
Originally Posted by KamiSpeed (Post 1280733)
truthfully idk, all cars vary on location of engine mounts, so it might be a breeze or it might take a long time
I was quoted 4 hours of labor and the tech said it was somewhat involved. During 9 dyno runs tuning my GTM Stage 1 SC, I did not notice enough movement to require stiffer mounts. It was not worth the cost to me personally.

KamiSpeed 08-25-2011 03:15 PM
Quote:
Originally Posted by NewYorkJon34 (Post 1280749)
Do you think it will get in the way of my headers or if I decide to go with a gtm stg.1 S/C in the future?
I doubt they'll get it in the way, they'll just replace oem engine mounts

KamiSpeed 08-26-2011 01:04 PM
transmission mount is only for Manual Transmission

and G37 owners, sorry but they still won't bet on it, they said its likely but they won't confirm it until they get their engineer testing it on a G37, but it does seem like they want to test it out on a G37 so I'll keep you guys updated

XwChriswX 08-26-2011 01:21 PM
But the Engine mount is still usable for AT's right?

KamiSpeed 08-29-2011 05:48 PM
Quote:
Originally Posted by XwChriswX (Post 1282844)
But the Engine mount is still usable for AT's right?
yes shouldn't make a difference for the engine mounts

Jordo! 08-30-2011 07:19 PM
Interesting -- but doesn't the Z have some pretty high tech and firm mounts?

From the spec sheet:

Side: 2 solid; rear: 1 liquid-filled; front: 1 electronically
controlled liquid-filled

KamiSpeed 08-31-2011 11:45 AM
Quote:
Originally Posted by Jordo! (Post 1289468)
Interesting -- but doesn't the Z have some pretty high tech and firm mounts?

From the spec sheet:

Side: 2 solid; rear: 1 liquid-filled; front: 1 electronically
controlled liquid-filled
I hear the same, but I guess these were intended for some major power or something like that

theDreamer 08-31-2011 11:48 AM
Quote:
Originally Posted by KamiSpeed (Post 1290586)
I hear the same, but I guess these were intended for some major power or something like that
That is usually the primary, also the stock mounts are designed around the factory power level and probably a little over, but once you start throwing on 100whp or more the stock mounts might not work up to standard.

KamiSpeed, any chance they might give a solid discount or support for a first buyer (with boost) and provide a solid review? Buying the part is fairly cheap, but install on these will cost a bit more with getting them in.

KamiSpeed 08-31-2011 01:50 PM
Quote:
Originally Posted by theDreamer (Post 1290590)
That is usually the primary, also the stock mounts are designed around the factory power level and probably a little over, but once you start throwing on 100whp or more the stock mounts might not work up to standard.

KamiSpeed, any chance they might give a solid discount or support for a first buyer (with boost) and provide a solid review? Buying the part is fairly cheap, but install on these will cost a bit more with getting them in.
I'll see what I can do, for now I got this image over from Drop

http://i146.photobucket.com/albums/r...p/IMG_7823.jpg

Drop using polyurethane pucks with a durometer rating of 75 giving you stiffer mounts and probably saving some weight too


All times are GMT -5. The time now is 04:28 PM.
Page 3 of 8 12 3 45 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2