Non Stop Tuning Pully Review
 

Hello guys, as a continuation of earlier reviews im finally getting around to saying a bit about the Non Stop Tuning pulleys i have on the car.

Despite a few options opening up for 370s i chose the NST pulley kit for a number of reasons.

1.) NST has a solid track record of building and marketing products of exceptional quality, craftsmanship, and reliability. They are known for what they can do for Toyota but are starting to push towards Nissan and other car manufacturers as well.

2.) NST is downright easy to work with and despite my lack of knowledge about pulleys, Mike at NST took plenty of time to sit down and talk about the pros and cons as well as talk about my build and the direction i wanted to go with it to ensure i was getting what i wanted.

3.) NST is based in Houston TX, where i keep the car, and could handle not only this, but all of my other mods all at once making it a lot easier to get all the parts on my car despite being deployed to Iraq at the time.

4.) The set for the 370z is under $200, has a proven gain with dyno charts posted and the best part is the pulleys can come in red and gray! Must have red!!! haha.

I apologize in advance, but i did not find time in my limited R&R to get a dyno done but, there is not really any need to do so since Mike from NST already has dyno sheets.

http://www.nonstoptuning.com/images/...VQ35-37-HR.jpg

So a few pics of the pulleys on my car are in order!
http://img189.imageshack.us/img189/4130/bc2010017.jpg
http://img805.imageshack.us/img805/5986/bc2010018.jpg
http://img692.imageshack.us/img692/9201/bc2010019.jpg

THE BOTTOM LINE:

All in all i am very pleased with the pulleys and the service i got from Mike at Non Stop Tuning and would strongly recommend anyone who is looking for some reliable gains to give him a call or email and see what he can do for you. I know everyone has a vendor or retailer who went the extra mile for them and i think Mike did that for me.

You can check out the NST Site HERE or at NST - NonStopTuning - The Leader In Sport Compact Pulley Development

Or check out the NST Blog, (which has more than a few shots of the gorgeous Katie) HERE or at NonStopTuning

How involved was the install? How long did it take? Did you have to pull out the radiator and fans?

The install is fairly basic but was part of a larger install since they were putting everything else on the car at the same time. Its a little cramped but they didnt have to pull out the radiator or fans. All in all it took almost an hour for them to get it done.

Did NST make you post this up or give you a discount? Sounds like an infomercial lol.

Anyway, nice gains. 5 whp/6tq and gains all across the board. Are these going to be reliable? I've seen absolutely terrible things happen to 350z's and G35's when they've had pulleys installed.

Also, last question, are these lightweight pulley's or underdrive?

Crank is underdrive, alternator is overdrive.

Nice Review :tup:

I want order K070786 Belt but can not connect with NST I can were buy.

Any NAPA store.

If your going to trust anyone on a pully i would trust NST, the very limited issues they have ever had out of the thousands of pulleys they have sold they fixed under warranty at no cost to the buyer.

yep thanks +1 for beating me to it

Send Mike at NST an email or, as some one else said check any NAPA store.

thank you.:ugh2:

http://nonstoptuning.files.wordpress...as-2010-20.jpg


Thank you for posting this, sir! Working on your project was a pleasure for us and we hope to be able to offer more services to your project in the future.

For those who have asked, there was absolutely zero discount/compensation given to Brandon in exchange for his review. He decided to post this on his own, and we very much appreciate it.

Good luck and have fun with all your projects everyone!

:tup::tup:

^^^ :yum:

Randomly stumbled upon this again tonight! Blast from the past!!


MIKE @ NST

Yeah...I'm sure there's more of that to come. :) Great Review... with real gains.:tup:

OP how's the review after 3 years? Thanks!!

YES :tup:


MIKE @ NST