Hi,Delete check enging bright
 

Hi, Anyone How to remove check engine bright I remove air fillter or sensor.
tell me please.:excited:

...?!

dealership, or buy one of those tuning programs and clear it?

or do an ECU reset?

Please don't drive without your air filters on.

Hi you know ECU reset.

Operations Procedures

1. Confirm that accelerator pedal is fully released, turn ignition switch “ON” (without starting engine) and wait 3 seconds.
2. Repeat the following steps (2a and 2b) procedures quickly five times within 5 seconds.
2a. Fully depress the accelerator pedal (HARD).
2b. Fully release the accelerator pedal.
3. Wait 7 seconds, fully depress the accelerator pedal and keep it for approx. 10 seconds until the CEL starts blinking.
4. Fully release the accelerator pedal (while the CEL is still blinking)
5. Wait about 10 second.
6. Fully depress the accelerator pedal and keep it for more than 10 seconds.
7. Fully release the accelerator pedal (The CEL light will continue to blink).
8. Turn ignition switch to “OFF” position and now you can start the car. The CEL light should be gone.
If the CEL light continues to remain ON, repeat the above steps. Timing is EXTREMELY critical to resetting the ECU

you have to time it perfectly, or it won't work.

Or just disconnect the Battery.

:bowrofl: best instructions ever. I think I'll go with "Disconnect the battery for $500"

you need to tell us more. I know being in thailand it's hard to type or express your situation , but what did you actually do? did you damage ECU or you took out air filter?

:tup:

Thank you all the answers.:tup:

if you are trying to say you removed the filter boxes with the MAF sensor in them and put on some filters or something you need to put those sensors back in somehow or bad things will happen.

BEEP BEEP BEEP. Times up.