Nissan 370Z Forum - Lightweight flywheels and SyncroRev Match

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)

- - Lightweight flywheels and SyncroRev Match (http://www.the370z.com/engine-drivetrain/1717-lightweight-flywheels-syncrorev-match.html)

esfourteen

01-22-2014 10:39 AM

Quote:

Originally Posted by juld0zer (Post 2563360)

Thread revival!

...

i'd assume if you swapped in a lightweight flywheel and lightweight underdrive pulley, the system would not overrev the engine. It will back off once the target RPM is reached.

PS. I'm not an expert.

I'm not sure why this thread got bumped to speculate, we already know for a fact that flywheel and pulley does not affect SRM. the only thing that affects SRM is final drive ratio (and transmission ratios if one were to actually change those out). ecutek has a mechanism to adjust the SRM offset, uprev currently does not.

/endthread

SPOHN

01-23-2014 07:31 AM

Heel to toe FTW.

NOBLE|370Z

02-16-2014 10:41 AM

Folks- I just had the stage 3 Southbend clutch kit (w/ 19lb flywheel) installed on my 370Z. It's an amazing clutch kit by the way- it really holds all 500 ponies that I'm laying down on the concrete.

As for the synchro rev functionality I can say from my experience that it still works 100% with the lighter flywheel.

Sent from my iPhone using Tapatalk

aesthetk1

06-27-2014 02:16 PM

I have the lightened flywheel and lighter under drive pulley and rev-match has no problems with either of them

SOUTH-BRONX

01-25-2015 11:55 AM

MoulaZ, do you have an OEM clutch or has that been upgraded as well?

All times are GMT -5. The time now is 08:02 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page