Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Nissport oil pressure gauge adapter (http://www.the370z.com/engine-drivetrain/16805-nissport-oil-pressure-gauge-adapter.html)

cossie1600 03-29-2010 10:54 PM

Nissport oil pressure gauge adapter
 
Anyone used this before?

Price is a lot steeper than I would like, but they seem to be the only game in town. Any alternatives? I want to install a warning light for low pressure before I install an oil cooler. Thanks

NISsport Oil Pressure Adapter

jpit 03-30-2010 12:09 AM

This is what I used:

NISMO Oil Tee Adapter for Oil Pressure Gauge - performance parts

By the way, the 370Z already has a warning light for low pressure. I bought the adapter to add an oil pressure gauge.

1slow370 03-30-2010 03:31 AM

Just so you guys know you can buy a one piece brass fitting from your local hardware store that will work better and cost much less... The thread sizes are all 1/8-27 npt so just get the one male two female fitting in the same configuration as the nismo piece, hell print out that photo and ask the store attendant for help. in and out in 5 minutes but be prepared to fork out a whole 4 bucks.

cossie1600 03-30-2010 07:51 AM

The stock gauge is BSPT, not NPT, slightly different. I would rather do it right than to have a leak at the track

Modshack 03-30-2010 08:58 AM

Another option ($20) with proper BSP threads for the car and OEM sender. NPT threads for typical Pressure gauge sender threads

Adapters and Bushings: Adapter - 1/8 BSP Male x 1/8BSP Female and 1/8 NPT Female (2) - egauges.com

http://www.egauges.com/images/VDO/OTOD.jpg

cossie1600 03-30-2010 09:43 AM

hi, isnt that bsp? i thought bspt is different than bsp something it being tapered

LateralG'z 03-31-2010 12:55 AM

Has somebody done DIY for aftermarket oil pressure gauge?

1slow370 03-31-2010 02:31 AM

one things for damn sure I'll be retapping that bich for NPT when i add one as straight thread doesn't seal unless you dope the crap out of it. Why the hell would nissan even use it? the thread form on tappered thread pinches off as you screw it in creating a seal that is air tight. straight thread can't do this so you need to put teflon tape or pipe dope on it to make it seal FYI.

Modshack 03-31-2010 09:20 AM

Quote:

Originally Posted by 1slow370 (Post 474046)
the thread form on tappered thread pinches off as you screw it in creating a seal that is air tight. straight thread can't do this so you need to put teflon tape or pipe dope on it to make it seal FYI.

Ummmm.....You might want to read this regarding sealing of NPT threads:
How tight should you install a NPT fitting?

cossie1600 03-31-2010 12:15 PM

Anyone have a picture of where the stock pressure sender is?

Modshack 03-31-2010 12:29 PM

Quote:

Originally Posted by cossie1600 (Post 474585)
Anyone have a picture of where the stock pressure sender is?

Brass colored sender..is for the temp, other is pressure switch.
http://www.the370z.com/members/semte...2-p1000856.jpg

LiquidZ 03-31-2010 12:32 PM

Modshack, do people ever call you Wikipedia?

Modshack 03-31-2010 01:46 PM

Quote:

Originally Posted by LiquidZ (Post 474640)
Modshack, do people ever call you Wikipedia?

LOL....:tup:

jpit 03-31-2010 02:24 PM

Mod,

It is the silver one. The brass one is the temperature sensor.

Modshack 03-31-2010 02:41 PM

Quote:

Originally Posted by jpit (Post 474873)
Mod,

It is the silver one. The brass one is the temperature sensor.

You're right! We discussed this before. I am old and easily confused....:tup:


All times are GMT -5. The time now is 08:05 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2