NO start after oil change
 

As above, changed the oil. Started the car and oil light went out slow increased RPM to 2000. and 10 second at 2000 RPM cat shut off and will not restart. I have fuel pressure. Tried reflash (uprev) no change, no codes. It did show a cam position sensor bank 2, but it cleared. I have the flashing RED wrench even with the car turned off.

Thoughts???

OK key FOB battery but the car still will not start.

Looks like ZERO injectors are firing. Sprayed some starter fluid in and the motor popped off. Looking at fuel pressure and cut the "O" ring. More tomorrow!!!

Gotta say that's a really weird problem you've got there. I mean, doing an oil change is something so unintrusive, the car wouldn't even know it happened. When I change oil, I literally do nothing other than remove the oil plug, replace the filter and pour in new oil. I don't disconnect the battery, I do nothing that would "tell the car" that I did something. I later update the service maintenance log.

Is there anything that you do other than above, that might've caused your issues?

Immobilizer fired!!!!

Key Light is still flashing. Searching for DIY reset now

Next step, disconnected Cam Position Sensor, car starts so changed the sensor still bad!

Anyone have the wiring PDF????

Here's the FSM, check out the PG.pdf file....

https://we.tl/t-64DmmaynC0