Help me please. Codes P2127, and p2138
 

I have been getting codes P2127 and P2138 ever since I installed my z1 longtube intakes. I cleaned my throttle bodies at the time but did not unplug them or remove them. I did move the butterfly valve with my finger to clean.

From what I can find P2127 only points to needing a new pedal, while P2138 could be throttle bodies or pedal...

Idk if I should replace the throttle bodies or the accelerator pedal.

Did you do the reset?

Help me please. Codes P2127, and p2138
 

I have done all three relearns and the codes went dormant for a while (permanent) for 1k miles but I just did a reset and they came back active now.


Sent from my iPhone using Tapatalk

Why did you do the relearn?

I would do all three again.

I have.. I also have now put a new accelerator pedal on and still getting codes and limp mode.


Sent from my iPhone using Tapatalk