Nissan 370Z Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Vibration Driving me Crazy (http://www.the370z.com/engine-drivetrain/136450-vibration-driving-me-crazy.html)

krayon808 07-25-2021 04:13 PM
Quote:
Originally Posted by zoren 370 (Post 4004200)
did the title say vibrator drives me crazy!!

Mods pls check this…
😂🤣😂🤣😂

JARblue 07-26-2021 10:06 AM
I have a solid trans mount and solid engine mounts. They'll rattle your fillings loose and are night and day compared to the stock mounts.

But I would also say it's not too bad cause racecar :driving:

Spooler 07-26-2021 10:16 AM
Quote:
Originally Posted by krayon808 (Post 4004241)
So fml I went under today . Found that the driver side bolts was loose on the trans mount. Not very loose but loose. Decided to just change it since I had the car up anyways . And damn it . It was the mount. How is it that bad. Others say the vibration is not that bad . But it’s pretty bad. So now I have z1 Poly motor mounts and trans mount for sale.
The trans mount is the worst. I have solid CJ Motorsports engine mounds and it is noticeable at startup and idle. Not bad at all when driving. I have a TT car so I need the motor to not raise up on one side. LOL. I am and will stay on the stock trans mount.

Rusty 07-26-2021 12:45 PM
Quote:
Originally Posted by JARblue (Post 4004323)
I have a solid trans mount and solid engine mounts. They'll rattle your fillings loose and are night and day compared to the stock mounts.

But I would also say it's not too bad cause racecar :driving:
You have stuff rattling around inside your skull besides your teeth too.

Tractionless 07-27-2021 10:29 AM
Quote:
Originally Posted by krayon808 (Post 4004241)
So fml I went under today . Found that the driver side bolts was loose on the trans mount. Not very loose but loose. Decided to just change it since I had the car up anyways . And damn it . It was the mount. How is it that bad. Others say the vibration is not that bad . But it’s pretty bad. So now I have z1 Poly motor mounts and trans mount for sale.
I installed a Torque Solutions poly trans mount and the NVH was horrible as soon as I fired it up. Even more pronounced when driving. It's amazing how much NVH that OE rubber mount dampens!

ZoomZ 07-31-2021 01:08 PM
Quote:
Originally Posted by krayon808 (Post 4004241)
So fml I went under today . Found that the driver side bolts was loose on the trans mount. Not very loose but loose. Decided to just change it since I had the car up anyways . And damn it . It was the mount. How is it that bad. Others say the vibration is not that bad . But it’s pretty bad. So now I have z1 Poly motor mounts and trans mount for sale.

Ya, Like I said, check torques. Bushings and rubber etc may look ok, but loose nuts and bolts always tell a story. ;)

zz


All times are GMT -5. The time now is 11:14 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2