Ron Davis radiator
 

Custom Ron Davis radiator should help keep temps in check

:tup: :tup:

Did you just have them make a custom one-off piece for you? Or have they done this before for 370Z? I note they only have 350 and Titan radiators listed on their website. Includes condenser?

I thought the RD radiator wouldn't work with the condenser? That's a really attractive option if it no longer requires me to lose AC. Where's you get it?

It’s a custom built radiator for me, yes it includes the condenser

High performance 01, guys name is Jason. Used to work for Gtm before it went south.

I can imagine a few guys here go “darn it one more thing to add to the build, but I must have it!!!” lol

I'm tempted to just buy it and mothball it until my current CSF ***** the bed. Again.

Ballpark price?

1400-1700 depending on how you want it set up

:D:

My room has a long block, intercooler, hood vents, intercoler kit, and my turbo kit. Running out of space.

Can you send me Jasons phone @

Thanks

Z

Pm sent

I purchased a Ron Davis radiator before and when I went to install it with the condenser it would not fit. I heard of the cooling benefits from the Ron Davis radiator but,without major modifications it will never fit with the condenser there is not enough room. I would not purchase the Ron Davis radiator unless you don’t mind driving your Z with no air condition or your Z is a track only vehicle. Also I seen that the price of the Ron Davis radiator is high with shipping. I ended up installing the CSF radiators on all my Z’s and I never had an issue with any of them leaking coolant. I did notice cooling benefits after installing the CSF radiators though with the CSF all aluminum triple pass design the CSF radiators will cool your VQ37HR engine very efficiently and when I used my heat gun I observed a drop in coolant temperature over the Genuine Nissan OEM radiator. Also I purchased intercooler cores and radiator caps directly from CSF radiators they gave top notch customer service I would purchase a CSF radiator again.

I will retain my Ac, condenser is mounted to the rad. You just have to modify thenrad support.

It’s already been done to a small group of vehicles.

Well I wish you the best of luck trying to get the Ron Davis radiator to fit. All the CSF radiators I installed all fit like a glove and was a direct fit and were excellent quality.

Did you do anything extra to the CSF radiators? Brass bleed valves, etc. Lots of folks have had issues at the 2 year mark.

I have plenty faith in M.A.M to get it to fit

Jason is the man! Would not have made it through my build without his help and has helped me out many times since.

How many CSF radiators have you had? Cause I know more than a few people who have had to replace leaking CSF radiators more than once. The research does not back up an "excellent quality" claim.

:iagree:

I have a CSF going in my car also. I am just treating it like a maintenance item and will replace every 2 years or so.

Haga

Reason why I didn’t go with one. 2 years and leaked

Don't worry about it Elmo. He even wants a AAM TT kit. Need I say more.

He might think it’s a way better design then the F.I. kit

Plus eddie ran one on his twin supercharged 370z