Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   EPS TB on boost (http://www.the370z.com/engine-drivetrain/129776-eps-tb-boost.html)

scope22 01-31-2019 08:09 PM

EPS TB on boost
 
So my car has been at z1 for about a week now and Jon can't get the TBs to learn or something...typical?

madwi 01-31-2019 08:20 PM

Not sure about typical but I was reading some threads yesterday that said some tuners did not like the EPS TBs and had issues with them. I honestly am not sure which thread that was in though. If I find it Ill toss the link up.

Rusty 01-31-2019 08:24 PM

Quote:

Originally Posted by madwi (Post 3820716)
Not sure about typical but I was reading some threads yesterday that said some tuners did not like the EPS TBs and had issues with them. I honestly am not sure which thread that was in though. If I find it Ill toss the link up.

I remember something about the tuners has issues with those TB's.

Elmo370z 01-31-2019 08:46 PM

Sold mine, they are garbage

NorthStyle 02-01-2019 05:58 AM

Have had mine installed for going on 2 years, no issues whatsoever. But, like others have said: some have issues, some don't.

projectpanda 02-01-2019 03:02 PM

I spoke with Jon back in October about tuning my EPS throttle bodies and he was reluctant. I ended up going with Martin at RS Enthalpy Tuning when he come up to Atlanta. I was originally tuned on Uprev with the throttle bodies, while I had no idle issues, I did have issues with revs rising when clutching in and throttle hang.

I converted over to Ecutek and now the rev rising issue is solved, but have idle issues when engine is up to temperature and slightly on the throttle hang.

Martin doesn't like the throttle bodies but he can get you squared away on either software.
Latez

Elmo370z 02-01-2019 05:04 PM

Quote:

Originally Posted by projectpanda (Post 3820958)
I spoke with Jon back in October about tuning my EPS throttle bodies and he was reluctant. I ended up going with Martin at RS Enthalpy Tuning when he come up to Atlanta. I was originally tuned on Uprev with the throttle bodies, while I had no idle issues, I did have issues with revs rising when clutching in and throttle hang.

I converted over to Ecutek and now the rev rising issue is solved, but have idle issues when engine is up to temperature and slightly on the throttle hang.

Martin doesn't like the throttle bodies but he can get you squared away on either software.
Latez

Nobody likes the TB’s. No matter what
You won’t get rid of rev hang with those Tb’s


All times are GMT -5. The time now is 04:49 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2