GT-R turbos on the VQ37
 

Does anybody know where this goes? I totally forgot! I remember taking it out with the transmission maybe?

https://uploads.tapatalk-cdn.com/201...7c1143ee7f.jpg

Sent from my iPhone using Tapatalk

Ebay image,
look like the same part

GT-R turbos on the VQ37
 

Thanks! I really appreciate it :)

Finished the intercooler piping for both sides and finally got the steering rack spacers and it finally fits now.
I might need to get ones that are wider so they don't break under load.
https://uploads.tapatalk-cdn.com/201...c43d4753b1.jpg
https://uploads.tapatalk-cdn.com/201...e4fc547b41.jpg

https://uploads.tapatalk-cdn.com/201...7bf311a1b3.jpg
https://uploads.tapatalk-cdn.com/201...a0131ff30d.jpg

Any suggestions for bov location?




Sent from my iPhone using Tapatalk

First time it's been out of the garage since January! Forgot how low this thing is!

https://uploads.tapatalk-cdn.com/201...196cfbdcd8.jpg


Sent from my iPhone using Tapatalk

Looks even better in the light :tup:

Thanks! Unfortunately it's back in as AAA screwed me over with the towing to a nearby muffler shop :/ so I'm going to have to tow it tomorrow morning before work.

https://uploads.tapatalk-cdn.com/201...0214a1b235.jpg


Sent from my iPhone using Tapatalk

Sorry for the lack of updates! So the car was towed to a nearby fabrication/drag racing shop and they are currently doing the downpipes. They couldnt find the Nissan flanges so i had to overnight them from Z1.

Hoping that they finish the exhaust tomorrow so i can start it and hear it with a full exhaust on!

My tuner is coming to my house to install the base tune so i can drive it to their shop next week. Hopefully everything goes well


Sent from my iPhone using Tapatalk

Sweet! Been lurking this thread for a while...can't wait to see this beast coming alive!:tup:

awesome my friend! I hope everything works perfect! :tup:

GT-R turbos on the VQ37
 

Thanks guys! I just decided to drive to Traverse city to have some time off today and the shop texted me that the downpipes are done!

https://uploads.tapatalk-cdn.com/201...b8d248dfab.jpghttps://uploads.tapatalk-cdn.com/201...829d4cab54.jpg


Sent from my iPhone using Tapatalk

Looks pretty LEGIT.

they did a good job there man :tup:

Totally Legit!!!

Sent from my SM-N910P using Tapatalk

GT-R turbos on the VQ37
 

Thanks guys! I checked it out today and it looks perfect! very thick stainless steel and perfect welds.

As of now I'm way over my budget so he recommended I just use ducting for the turbo inlet so I can route it somewhere cold for now.
he's welding my bov flanges as soon as they come in either Friday or Thursday. Hopefully I'll have it back home this weekend!



Sent from my iPhone using Tapatalk

Coming along soo nicely. Can't wait for the end product.