Originally Posted by Cyber370 (Post 3541456)

This may sound like a stupid newbie question but, didn't all Nismos come with a factory oil cooler? Was it just a question of it not providing sufficient cooling in your case?
I'm just curious. As a new 2016 Nismo owner, I thought I didn't have to worry about oil temps due to factory cooler.

Originally Posted by jcosta79 (Post 3541405)

Hmmmm, my kit did not come with spacers even though I specified I had a Nismo.

Sent from my Nexus 7 using Tapatalk

Originally Posted by Nismonerd (Post 3541507)

Didn't screw up, just chose to do it differently. I did flip the damper so as to provide more room to mount the cooler in front of it. The thermo plate somewhat isolates the cooler and prevents drainback as it's routed through the filter, which is a Purolator that has a more robust anti-drainback system.
Also, with the ports down, makes it much easier to get all of the old oil out during an oil change. With the ports up, you're leaving almost a quart of dirty oil in the cooler that you need to deal with getting out somehow.

Originally Posted by Rusty (Post 3542672)

Had to make my own.

Originally Posted by Spooler (Post 3542719)

If you buy an oil cooler kit from Fast Intentions you get everything you need. Just sayin. One stop shop for an oil cooler for a Nismo.

Originally Posted by jcosta79 (Post 3541406)

Nismo?

Sent from my Nexus 7 using Tapatalk