Nissan 370Z Forum
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Flex fuel kit (http://www.the370z.com/engine-drivetrain/109290-flex-fuel-kit.html)

03specvvictor 12-05-2015 10:22 PM
we can extend or shorten the harness to mount the unit elsewhere so you can choose locations like the top of the tank or the engine compartment.

MAMotorsports 12-07-2015 09:01 AM
So the plan is to Hijack the MAF signal to run the FlexFuel sensor?

03specvvictor 12-09-2015 09:44 AM
Yes, that is the plan with the Ecutek software, I'm knocking off both maf sensor using one to signal the flex fuel and the secondary to signal the Aem wide band.

RBfastback 12-10-2015 02:18 AM
yes extremely interested

Viktoriia 03-24-2017 09:59 PM
Bump ?

Stillen 05-08-2017 04:30 PM
I cut my no problem, I did this my self to put my E85 innovate gauge.

Viktoriia 05-09-2017 11:18 AM
More info

ihiryu 05-09-2017 02:23 PM
I'm actually in the works with Fuel-It for making a flex fuel setup. My kit is currently installed and still in the middle of testing. Attempting to make it as PNP as possible. My kit has been installed for about 2 weeks now, just been slowly tuning it.

Currently running returnless as well still!

phunk 05-09-2017 10:15 PM
Its insanely easy. The fuel line plugs right into the sensor. All you need to do is make a 8-12" hose that plugs from the sensor to the fuel pump.

ihiryu 05-10-2017 11:25 AM
Quote:
Originally Posted by phunk (Post 3651202)
Its insanely easy. The fuel line plugs right into the sensor. All you need to do is make a 8-12" hose that plugs from the sensor to the fuel pump.
Go away! You don't need flex fuel in chicago

Viktoriia 06-13-2017 05:34 PM
Quote:
Originally Posted by ihiryu (Post 3651427)
Go away! You don't need flex fuel in chicago
bumpppppp :bowrofl:

phunk 07-12-2017 08:43 PM
2 Attachment(s)
behold

gbrettin 07-12-2017 08:54 PM
Quote:
Originally Posted by phunk (Post 3674089)
behold
Simple solution. I like it.

Sent from my SM-G930P using Tapatalk

Jayhovah 07-12-2017 08:54 PM
Quote:
Originally Posted by phunk (Post 3674089)
behold
That is hot.

Jayhovah 07-12-2017 08:55 PM
So how does this sensor get wired in?


All times are GMT -5. The time now is 03:54 AM.
Page 2 of 4 1 2 34
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2