Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Engine & Drivetrain (http://www.the370z.com/engine-drivetrain/)
-   -   Underdrive Crank Pulley and etc (http://www.the370z.com/engine-drivetrain/100353-underdrive-crank-pulley-etc.html)

Joker_J 01-29-2015 08:44 AM

Underdrive Crank Pulley and etc
 
I made a similar post but I'm thinking about getting a Stillen Crank Pulley. However, the issue is that some members are saying that I would need to get an alternator pulley as well? Would I be fine with just the Crank Pulley and what it is the 'Underdrive' meaning for? Sorry, not a professional with cars as you can tell haha

Thanks!

Elmo370z 01-29-2015 08:52 AM

This is a topic that will go both ways, some have had this pulley on their vehicle's for 20-30k miles with no trouble and others with tell you its not worth the risk due to the engine harmonics and other will say it will cause serve vibration that could cause catastrophic engine failure. I sold mine because i didn't want to risk it. Just my 2 cents

Joker_J 01-29-2015 08:53 AM

Quote:

Originally Posted by Elmo370z (Post 3095792)
This is a topic that will go both ways, some have had this pulley on their vehicle's for 20-30k miles with no trouble and others with tell you its not worth the risk due to the engine harmonics and other will say it will cause serve vibration that could cause catastrophic engine failure. I sold mine because i didn't want to risk it. Just my 2 cents

Hmm.... I'm 50/50 right now on what to do haha probably will wait for other forum members personal experience lol

BC416 01-29-2015 09:02 AM

Not worth it for a few HP you'll gain IMO.

Mythic 01-29-2015 09:02 AM

Ive ran them on my viper trucks drag racing them hard for years with no problems, but these engines seem alot more finiky /sensitive, to me the gains from it arent worth the risk on a 370

Joker_J 01-29-2015 09:12 AM

Quote:

Originally Posted by BC416 (Post 3095803)
Not worth it for a few HP you'll gain IMO.

Quote:

Originally Posted by Mythic (Post 3095804)
Ive ran them on my viper trucks drag racing them hard for years with no problems, but these engines seem alot more finiky /sensitive, to me the gains from it arent worth the risk on a 370

Yea...I was just wanting a more faster response when I accelerate, not worried about how much hp I gain lol

I think i'll have to pass on the pulley!

BC416 01-29-2015 09:15 AM

Quote:

Originally Posted by Joker_J (Post 3095812)
Yea...I was just wanting a more faster response when I accelerate, not worried about how much hp I gain lol

I think i'll have to pass on the pulley!

You're better off going with UpRev to eliminate the throttle lag. A lot better bang for your buck than installing pulleys.

Joker_J 01-29-2015 09:24 AM

Quote:

Originally Posted by BC416 (Post 3095817)
You're better off going with UpRev to eliminate the throttle lag. A lot better bang for your buck than installing pulleys.

Just tuning it?
Yea a friend told me to do that instead of spending money on extra things lol
But I dont know if there is a place that does tuning where I live:eek:

BC416 01-29-2015 09:32 AM

Quote:

Originally Posted by Joker_J (Post 3095825)
Just tuning it?
Yea a friend told me to do that instead of spending money on extra things lol
But I dont know if there is a place that does tuning where I live:eek:

Yeah, I believe a tune can eliminate most of the throttle lag these cars have stock. Finding a trust worthy tuner is one of the most difficult things in the car modding business so I def understand.

I'd ask around in your local forums and talk to some other Z guys in the area. They can probably point you in the right direct.

JARblue 01-29-2015 09:36 AM

Quote:

Originally Posted by Joker_J (Post 3095825)
But I dont know if there is a place that does tuning where I live:eek:

Have you searched? lol

I think Hal at Dynosty is right in your backyard and extremely reputable in the Z tuning world. I'd look his direction first.

Joker_J 01-29-2015 09:37 AM

Quote:

Originally Posted by JARblue (Post 3095832)
Have you searched? lol

I think Hal at Dynosty is right in your backyard and extremely reputable in the Z tuning world. I'd look his direction first.

I searched louisville and roberts came up. Tried contacting them but I'm guessing their closed for good :/

JARblue 01-29-2015 09:38 AM

Dynosty - Performance Automotive Parts, Builds and Dyno Tuning

Joker_J 01-29-2015 09:40 AM

Quote:

Originally Posted by JARblue (Post 3095835)

You are the man! I just map quested the address and its literally 15 min away!
Wish I would've known earlier! ....:bowrofl:

Do they also install parts as well?

JARblue 01-29-2015 09:41 AM

Quote:

Originally Posted by Joker_J (Post 3095840)
You are the man! I just map quested the address and its literally 15 min away!
Wish I would've known earlier! ....:bowrofl:

Do they also install parts as well?

:tiphat:

Their website says they do full performance builds, so I'm going to venture that's a yes.

Joker_J 01-29-2015 09:48 AM

Quote:

Originally Posted by JARblue (Post 3095842)
:tiphat:

Their website says they do full performance builds, so I'm going to venture that's a yes.

You have just made my day man! haha
They also install parts as well so I'm pretty sure they wont charge an arm and leg like the stealerships do... time do start saving up haha

btw, how much does a tune-up usually cost and what does it do?
(Sorry, when it comes to certain things, I need specific details xD my ocd kicks in) :tiphat:


All times are GMT -5. The time now is 01:04 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2