Parts are stainless steel, while other parts are anodized aluminum. No modification necessary.

Go from :ugh2: to :driving: in 30 minutes.


MIKE @ NST

We've had these question asked a few times via PM and email, so I figured I'd post them here...

1. NST shifters are part stainless steel, part anodized aluminum.
2. No cutting or modification of any sort is required. 100% drop in.
3. No transfer of parts or modification is required.

We have a few photos of our shifter vs. the oem 370Z shifter in our SSK thread, on our website, facebook, and instagram accounts.

http://scontent-a.xx.fbcdn.net/hphot...19286353_n.jpg

Nissan 370Z (left) and Nissan 240SX (right) pictured here.

http://scontent-a.xx.fbcdn.net/hphot...72321715_n.jpg

NST Nissan 370Z (top) and OEM Nissan 370Z (bottom) pictured here.

http://fbcdn-sphotos-f-a.akamaihd.ne...42360987_n.jpg

And you can add one of three shift knobs: shift ball, short knob, tall knob.


From :ugh: to :driving: in about 30 minutes :tup:


MIKE @ NST

Anyone have any new photos or reviews to share with the community?
If so, post up!


MIKE @ NST

Anyone else looking for a great shifter and/or shift knob?


MIKE @ NST

Questions, comments, and photos are absolutely welcome.


MIKE @ NST

http://scontent-a.xx.fbcdn.net/hphot...75169003_n.jpg


MIKE @ NST

We have a number of NST Short Shifter Kits in stock and ready for immediate shipping.
Discounted pricing the rest of February.

Many thanks guys and girls!


MIKE @ NST

http://scontent-b.xx.fbcdn.net/hphot...41936483_n.jpg

Who wants?!

:driving:


MIKE @ NST

has there been no one that has installed this and can give a review?

I could not agree with you more. We have sold a bunch of these SSK over the past couple months, for both the 350Z and the 370Z.

I guess everyone is out there :driving: and being :tup:


MIKE @ NST

How long will this price be good for? Im in for one depending on the outcome of cbtech's review. Curious about 5th and 6th gear locations in the shift gate.

Sent from my Samsung Note 10.1 using Tapatalk

MSRP is $86.00.
Current sale price is $55.90.

:driving:


MIKE @ NST

Me too!! Cuz I tried to install it.. Got gears 1-4 but 5,6 and reverse noting! I've been waiting for someone else to install it so that I could reinstall mine and see what I did wrong :confused:

We supply a RED spacer with the NST kit. This spacer takes place of the white oem piece that is used with the OEM shifter.
You must install this piece with the FLAT side facing UP! You will have the 5/6/R issue if the flat side is NOT facing up!

Take a look at this photo, and install the RED spacer with the flat side UP!
The "cup" seen here needs to face down.

https://scontent-b.xx.fbcdn.net/hpho...96606337_n.jpg

:driving:


MIKE @ NST

http://scontent-a.xx.fbcdn.net/hphot...20639437_n.jpg


MIKE @ NST