|
It's Thursday December 4th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
OS GIKEN Twin Plate Clutch with sprung disc: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. OS GIKEN Super Lock LSD: OS Giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. As always from OS Giken, our LSDs are not only made from the highest quality materials, our precise machining, forged gears, and sound engineering makes our LSDs the most durable and reliable race performance LSDs available. Some highlights of the OS Giken brand differentials are:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Friday December 5th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Monday December 8th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Tuesday December 9th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday December 10th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Saturday December 13th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Thursday August 14th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday December 17th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Thursday December 18th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
OS GIKEN Twin Plate Clutch with sprung disc: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. OS GIKEN Super Lock LSD: OS Giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. As always from OS Giken, our LSDs are not only made from the highest quality materials, our precise machining, forged gears, and sound engineering makes our LSDs the most durable and reliable race performance LSDs available. Some highlights of the OS Giken brand differentials are:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday December 31st and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
OS GIKEN Twin Plate Clutch with sprung disc: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. OS GIKEN Super Lock LSD: OS Giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. As always from OS Giken, our LSDs are not only made from the highest quality materials, our precise machining, forged gears, and sound engineering makes our LSDs the most durable and reliable race performance LSDs available. Some highlights of the OS Giken brand differentials are:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Monday January 5th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Injector Dynamics ID725 Injectors: The ID725 exists for all those applications where the ID1000 is just a little bit too big. The ID725 will maintain strict linearity at flow rates that will satisfy idle and cruise requirements for even the smallest engines. This makes the ID725 ideal for emissions compliant OEM applications while offering the high flow rates required for mildly boosted motors. With pressure capability in excess of 8 bar this injector has found a home in many different applications. From upgrade injectors on V8's running factory Ford or GM ECU's, to OEM supply on everything from emissions legal turbo kits to Noble's new 650hp M600, the ID725 is holding its own with the ID1000 and ID2000 which have achieved near cult status in the aftermarket tuning industry. STILLEN 500+HP VQ37 Supercharger System: STILLEN is proud to offer the STILLEN supercharger system for the Nissan and Infiniti VQ37 (370Z/G37.) This supercharger system took over a year to develop and involves some revolutionary designs. This supercharger system is developed to offer the customer easy upgradability and installation without requiring a hood replacement to complete the installation! With this supercharger system we bump the power output to over 500 horsepower! Vortech V3 supercharger: This supercharger system incorporates the Vortech V3 self-lubricating supercharger system. With a completely sealed supercharger system there is no concern of having to run additional oil lines or anything like that. Also, the V3 supercharger is a much quieter system than previous models. The major features to the Vortech supercharger are the ease of upgrading power later on, as well as the installation without having to modify the hood! PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday January 7th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
OS GIKEN Twin Plate Clutch with sprung disc: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. OS GIKEN Super Lock LSD: OS Giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. As always from OS Giken, our LSDs are not only made from the highest quality materials, our precise machining, forged gears, and sound engineering makes our LSDs the most durable and reliable race performance LSDs available. Some highlights of the OS Giken brand differentials are:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Thursday January 8th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Monday January 12th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
Are you guys selling GTM's stage 1 supercharger?
If so, how long for delivery? -Adalvar |
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! |
|
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance __________________ |
It's Thursday January 29th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Fuel Injector Clinic Nissan 350Z/370Z with VQ35/37DE engine Top-feed Injector Set: 6x1100cc Saturated / High Impedance Ball & Seat Injectors. These injectors utilize the latest technology and provide great linearity and short pulse width repeatability. Includes pigtails PGTJETR6 or add Plug & Play adaptors PADPJtoD6. Fuel Injector Clinic injector sets are precisely flow matched to within 1%. Each injector within each set is individually numbered and results for each injector are listed on a detailed flow sheet included with the set. Dynamic flow matching is used only on injector sets where the additional time and cost are justified by the corresponding benefits gained during the tuning process. Fuel Injector Clinic injectors are flow tested and rated at 43.5psi (3Bar) at 75ºF average fuel temperature using CF-16B calibration fluid. The superior spray pattern and atomization make these injectors easy to tune and provide great drivability. GTM 370Z 500HP STG1 Supercharger (Tuner) Kit: We are please to announce the GTM supercharger system for the 370Z. Our GTM supercharger system uses the Rotrex C38 supercharger. The key to the Rotrex supercharger is unique compactness, efficiency, low noise and reliability and its state of the art traction drive technology. Great speeds and low noise are just some of the advantages of traction drives over traditional gear transmissions. Traction drives transmit power through friction forces between its rolling elements. The Rotrex traction drive uses an elastic annulus with a small pre-span to secure contact between the roller planets and the sun shaft with a reasonable force. The patented "ramp effect" increases efficiency and reliability in the transmission by regulating the torque transfer capability on demand through self-adjusting planet geometry. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
Motion Lab has the engine components, forced induction kits, and clutches you need!!
|
Motion Lab has the engine components, forced induction kits, and clutches you need!!
|
Check out the GReddy Tuner Twin Turbo Kit for your Nissan 370Z available at Motion Lab Tuning.
|
It's Tuesday February 17th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Cusco LSD - Type RS: The Cusco Type RS LSD had proved to be capable of competition use in the All Japan Gymkhana Championship without overhauling a single time during the season. With all drivers and teams finishing with good or championship results at the end of the season. According to Cusco's in house research, initial torque is 50 to 70% lower compared to the conventional cone plate type LSD enabling lower drive friction and better response.
There are three ways to set your Cusco Limited Slip Differentials: 1 way, 1.5 way and 2 way.
Okada Projects Plasma Direct: A revolution in ignition technology!! The Plasma Direct is the ignition coil with a high power amplifier built in to it. The Plasma Directs produce 4 times more spark energy than stock coils and also generate an ultra fast multi spark discharge of 10 sparks up to highest RPM. The spark amperage is increased 100%, allowing the spark to reach many more molecules and therefore accelerate the ignition and combustion process. This is extremely important in forced induction applications but also improves the performance of normally aspirated engines. The Plasma Direct will increase horsepower and torque throughout the entire rpm range. This upgrade will also reduce fuel consumption. Even the engines with a legendary smoothness will be further refined with the Plasma Direct upgrade. Our Plasma Directs are OBD II compliant. Installation is easy. Direct bolt-in to the engine, no splicing or cutting into stock wiring, simply replace the stock coils with our Plasma Direct Coils and ready to go! Plasma Direct is made to a specific application. Highlights:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday February 18th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit: Mishimoto proudly announces the all-new Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 / Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed! GReddy Tuner Turbo Kit for the 370Z: Easily add an extra +175HP to a 370Z with the GReddy Intercooled-Twin Turbo TD06SH-20G Tuner Turbo Kit! Introducing the latest addition to GReddy’s line of “Tuner Turbo Kits,” the 370Z Twin-Turbo system boasts an impressive 175 horsepower increase at a mere 6.4psi of boost (That's a 535hp 370Z!). Tuner Turbo Kits come standard with high quality components: twin TD06SH-20G turbocharger, heavy duty cast turbo manifolds, Type-T external wastegates, Airinx intake system, x-large Type-29 R-Spec intercooler, smooth flowing aluminum piping, and a large capacity cast aluminum oil pan. Paired with the optional tuning kit utilizing e-Manage Ultimate, plug-n-play harness, fuel system upgrade, and true dual 70mm Turbo Ti-C exhaust system, it is a fearsome street machine harnessing 452 wheel horsepower and 344lb-ft of torque. With additional engine work and tuning, this tuner kit has the potential of making 850 plus horsepower (over 500hp increase!) just as we were able to achieve on the GReddy Twin Turbo 350Z HR. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Thursday February 19th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit: Mishimoto proudly announces the all-new Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 / Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed! GReddy Tuner Turbo Kit for the 370Z: Easily add an extra +175HP to a 370Z with the GReddy Intercooled-Twin Turbo TD06SH-20G Tuner Turbo Kit! Introducing the latest addition to GReddy’s line of “Tuner Turbo Kits,” the 370Z Twin-Turbo system boasts an impressive 175 horsepower increase at a mere 6.4psi of boost (That's a 535hp 370Z!). Tuner Turbo Kits come standard with high quality components: twin TD06SH-20G turbocharger, heavy duty cast turbo manifolds, Type-T external wastegates, Airinx intake system, x-large Type-29 R-Spec intercooler, smooth flowing aluminum piping, and a large capacity cast aluminum oil pan. Paired with the optional tuning kit utilizing e-Manage Ultimate, plug-n-play harness, fuel system upgrade, and true dual 70mm Turbo Ti-C exhaust system, it is a fearsome street machine harnessing 452 wheel horsepower and 344lb-ft of torque. With additional engine work and tuning, this tuner kit has the potential of making 850 plus horsepower (over 500hp increase!) just as we were able to achieve on the GReddy Twin Turbo 350Z HR. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Friday February 20th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit: Mishimoto proudly announces the all-new Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 / Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed! GReddy Tuner Turbo Kit for the 370Z: Easily add an extra +175HP to a 370Z with the GReddy Intercooled-Twin Turbo TD06SH-20G Tuner Turbo Kit! Introducing the latest addition to GReddy’s line of “Tuner Turbo Kits,” the 370Z Twin-Turbo system boasts an impressive 175 horsepower increase at a mere 6.4psi of boost (That's a 535hp 370Z!). Tuner Turbo Kits come standard with high quality components: twin TD06SH-20G turbocharger, heavy duty cast turbo manifolds, Type-T external wastegates, Airinx intake system, x-large Type-29 R-Spec intercooler, smooth flowing aluminum piping, and a large capacity cast aluminum oil pan. Paired with the optional tuning kit utilizing e-Manage Ultimate, plug-n-play harness, fuel system upgrade, and true dual 70mm Turbo Ti-C exhaust system, it is a fearsome street machine harnessing 452 wheel horsepower and 344lb-ft of torque. With additional engine work and tuning, this tuner kit has the potential of making 850 plus horsepower (over 500hp increase!) just as we were able to achieve on the GReddy Twin Turbo 350Z HR. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Tuesday February 24th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit: Mishimoto proudly announces the all-new Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 / Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed! GReddy Tuner Turbo Kit for the 370Z: Easily add an extra +175HP to a 370Z with the GReddy Intercooled-Twin Turbo TD06SH-20G Tuner Turbo Kit! Introducing the latest addition to GReddy’s line of “Tuner Turbo Kits,” the 370Z Twin-Turbo system boasts an impressive 175 horsepower increase at a mere 6.4psi of boost (That's a 535hp 370Z!). Tuner Turbo Kits come standard with high quality components: twin TD06SH-20G turbocharger, heavy duty cast turbo manifolds, Type-T external wastegates, Airinx intake system, x-large Type-29 R-Spec intercooler, smooth flowing aluminum piping, and a large capacity cast aluminum oil pan. Paired with the optional tuning kit utilizing e-Manage Ultimate, plug-n-play harness, fuel system upgrade, and true dual 70mm Turbo Ti-C exhaust system, it is a fearsome street machine harnessing 452 wheel horsepower and 344lb-ft of torque. With additional engine work and tuning, this tuner kit has the potential of making 850 plus horsepower (over 500hp increase!) just as we were able to achieve on the GReddy Twin Turbo 350Z HR. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday February 25th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit: Mishimoto proudly announces the all-new Nissan 370Z, 2009+ / Infiniti G37, 2008+ (Coupe only) Oil Cooler Kit. Specially designed for your Nissan 370Z and Infiniti G37, the Mishimoto 370z oil cooler kit is a direct fit and is beneficial to both manual and automatic applications. Enthusiasts who drive their high-performance cars on or off the track know the importance of keeping their oil temperatures low to prevent damage, or even seizure, of the engine. The Mishimoto Infiniti G37 / Nissan 370Z Oil Cooler Kit comes with a Lifetime Warranty, so you know quality is guaranteed! GReddy Tuner Turbo Kit for the 370Z: Easily add an extra +175HP to a 370Z with the GReddy Intercooled-Twin Turbo TD06SH-20G Tuner Turbo Kit! Introducing the latest addition to GReddy’s line of “Tuner Turbo Kits,” the 370Z Twin-Turbo system boasts an impressive 175 horsepower increase at a mere 6.4psi of boost (That's a 535hp 370Z!). Tuner Turbo Kits come standard with high quality components: twin TD06SH-20G turbocharger, heavy duty cast turbo manifolds, Type-T external wastegates, Airinx intake system, x-large Type-29 R-Spec intercooler, smooth flowing aluminum piping, and a large capacity cast aluminum oil pan. Paired with the optional tuning kit utilizing e-Manage Ultimate, plug-n-play harness, fuel system upgrade, and true dual 70mm Turbo Ti-C exhaust system, it is a fearsome street machine harnessing 452 wheel horsepower and 344lb-ft of torque. With additional engine work and tuning, this tuner kit has the potential of making 850 plus horsepower (over 500hp increase!) just as we were able to achieve on the GReddy Twin Turbo 350Z HR. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance __________________ |
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications.
After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday March 4th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Thursday March 5th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
OS GIKEN Twin Plate Clutch with sprung disc: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. OS GIKEN Super Lock LSD: OS Giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. As always from OS Giken, our LSDs are not only made from the highest quality materials, our precise machining, forged gears, and sound engineering makes our LSDs the most durable and reliable race performance LSDs available. Some highlights of the OS Giken brand differentials are:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
Motion Lab has the engine components, forced induction kits, and clutches you need!!
|
It's Wednesday March 11th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
OS GIKEN Twin Plate Clutch with sprung disc: In spite of its decreased diameter, our clutch allows for extremely efficient power transfer and improved engine response. Our redesigned leverage mechanism of the diaphragm spring on the center cover results in higher pressure of the clutch disk while reducing pedal effort. In addition, ventilation holes are designed to reduce heat generated inside the clutch system and allows for the friction plate dust to exit outside the clutch system, thus increasing reliability and safety. All OS Giken clutches include a corresponding performance flywheel to ensure maximum performance and unlock your vehicle’s potential. OS GIKEN Super Lock LSD: OS Giken utilized its accumulated racing knowledge and engineering experience to develop its own limited slip differential. Four years of extensive research and development lead to a new and revolutionary LSD design with the capacity to house an unprecedented number of friction plates (up to 28 plates in total) and thus the OS Super Lock LSD was born. The increased number of plates directly has not only dramatically improved our LSD design's locking force and enables it to lock fully and completely. An added benefit to being a fully locking mechanism is that less heat is generated, thus resulting in incredible durability and reliability. As always from OS Giken, our LSDs are not only made from the highest quality materials, our precise machining, forged gears, and sound engineering makes our LSDs the most durable and reliable race performance LSDs available. Some highlights of the OS Giken brand differentials are:
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Wednesday March 18th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
Carrillo Connecting Rods: Carrillo Connecting Rods are manufactured from a proprietary steel, manufactured and forged to custom specifications. After experimenting with virtually every other reasonable material, Carrillo found a chromium/nickel/vanadium/molybdenum-forged alloy to be the best product to meet the stringent requirements of performance motors. Through out the manufacturing process Carrillo rods are inspected and measured to uphold high quality standards. When you go with Carrillo - you go with quality. Rods sold as a *COMPLETE* Matched Set. GReddy Air Intake Systems: GReddy Air Intake Systems are designed to be the perfect match to free-flowing GReddy Exhaust systems, like the SP Elite, RS-Racing Sport and Evo3. Like our exhausts we carefully study each specific application to develop the ideal system; complete, easy to install, with quality construction and great fitment. GReddy Air Intake systems improve horsepower through a cool air-charge and smoothly increasing intake air-flow. Our new 4-layer synthetic, deep pleated, dry filter element provides improved filtration, with long service intervals. It also provides high flow, but without sensor contamination. Manufactured and designed in association with aFe Power, for USA spec vehicles. Performance gains are attributed to the use of our application specific filter heat-shields, air-box covers, or our new Momentum series high flow, sealed air-boxes. PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Thursday March 19th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Friday March 20th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
It's Friday March 27th and Motion Lab Tuning has the best deals on all the major engine modifications and components you need to transform your Z. Between the numerous offerings from GTM you also have companies like GReddy and Stillen bringing some noteworthy options to the market.
DeatschWerks Fuel Injectors 600cc: The Deatschwerks Nissan Fuel Injectors includes a set of 6 drop-in fitment VQ35/37 Series injectors. The new Nissan injectors have been developed with the same commitment to quality, drop-in fitment, and easy tunability that made the Deatschwerks Subaru injectors the #1 choice of top Subaru tuners around the US and world. Compatibility with OEM injector driver and is ethanol and methanol compatible each set is flow matched to within 1-2%. A flow report is included with your specific flow results drop-in fitment for easy installation Price listed is for a matched/balanced set of 4 injectors. Deatschwerks fuel injectors are built from using only OEM Cores. Some of these injectors are new and some of them are core swaps. Each injector that is processed and built by Deatschwerks goes through a 40 point data inspection before it can ship out the door. STILLEN Generation 3 Ultra Long Tube Dual Intake Kit: STILLEN was the first national tuner to introduce a high flow intake for the Nissan / Infiniti VQ37 cars. Our first short tube intake provided a small gain in power with a great sound. Economical and easily installed, this Generation 1 Short Tube Intake became instantly popular. Some months later we introduced our Generation 2 Long Tube Intake, featuring polished tubes, even better sound and a power gain over the Generation 1. Our continuing dedication to getting the maximum performance from each vehicle has led to the introduction of our new Generation 3 Ultra Long Tube Intake for the 370Z. This intake has a radically new design that provides dramatically better power than any intake on the market for the VQ37 equipped vehicles. Our R&D team went engineered and dyno tested more than 50 variations before being satisfied that this system is the best that can be made for the VQ37 engines. The new Gen 3 Ultra Long Tube Intake places two large K&N filters in front of the radiator. Strategic placement of the filters allow for optimum cold air flow and easy filter removal for cleaning. It features additional polished tubes that pass through the front core support, larger air filters than the Generation 2 unit. On some applications such as the G37 a urethane splash guard is included in the kit to help protect the filter. This is only necessary on vehicles with larger grill openings from the factory. All kits feature a system of varied diameter tubing and steps to maximize air velocity. The power result: A dyno-proven 17.5 horsepower on the 370Z. This translates to an estimated 20-22 horsepower gain at the flywheel! No other intake for the VQ can match these power gains! Recommended installation requires removal of the front fascia clip (not absolutely necessary for some vehicles, but significantly aids in ease of installation) and slightly enlarging the holes through the front core support.
PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask! Follow whats going on at the shop on our Facebook page Motion Lab Tuning - Automotive - Charlotte, NC | Facebook Thanks for looking! Alex Goodwin AlexG@motionlabtuning.com MotionLabTuning.com - Engineering Performance |
| All times are GMT -5. The time now is 02:39 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2