Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Drivetrain/Engine (http://www.the370z.com/drivetrain-engine/)
-   -   Z1 Motorsports 370Z Oil Cooler Kit (http://www.the370z.com/drivetrain-engine/38779-z1-motorsports-370z-oil-cooler-kit.html)

Z1motorsports 06-27-2011 04:50 PM

Z1 Motorsports 370Z Oil Cooler Kit
 
Z1 Motorsports 370Z Oil Cooler Kit for all '09+ 370Z models (will fit Turbo Charged/Super Charged equipped Z's)

Designed with the highest quality products available to provide efficient cooling, trouble free usage, and simple installation. The Z1 Motorsports Oil Cooler Kit comes complete with all necessary components.

The Z1 Motorsports 370Z Oil Cooler Kit features the following components standard:

1x Setrab Oil Cooler Core (19 Row Standard; Additional sizes available)
1x Z1 -10 AN SS Oil Cooler Line Set (Optional protective sleeving available pre-installed)
1x Mocal Sandwich Adapter (Non-Thermostatic Standard; Optional Thermostatic model available)
1x Setrab Oil Cooler Lower Mount
1x Z1 Motorsports Oil Cooler Upper Mount
1x Z1 Motorsports 370Z Oil Cooler Install Hardware Kit
1x Z1 Motorsports 370Z Oil Cooler Installation Instructions
2x Setrab (-10 AN to 22mm Port) adapter fittings (Cooler)
2x Mocal (-10 AN to 22mm Port) adapter fittings (Sandwich adapter)
2x 13/16" Rubber Seal (Sandwich Adapter)
1x Power Steering Hose Spacer

Unlike our various competitors' oil cooler packages, Z1 Motorsports has addressed the various issues with all current oil cooler kits on the market and has created an oil cooler kit the brings the best of them all to one kit. Here are a few key comparisons between the Z1 Motorsports Oil Cooler Kit and our...competitors.

The Oil Lines - The Z1 Motorsports kit uses fully braided stainless steel -10 AN (5/8") line, offering both increased oil capacity and higher flow volumes.
No Special Tools or Skills Required - There is no need for special install tools or additional parts. The lines come preassembled, ready for installation. The included hardware kit includes all fasteners, etc.
Uses OEM Style Oil Filter - You retain your OE Nissan Oil Filter. This means there will not be any confusion when you go to do your next oil change.
Freedom to Choose - Unlike other kits, we let YOU choose the kit you need. You can custom build you kit depending on your driving style, needs and budget.
Tech Support/ Install Instructions - Each kit comes complete with the necessary, easy to use, step-by-step installation instructions (which can also be found online on our website).
Protective Line Wrapping - Available pre-installed, this wrapping prevents damage to both the line and the chassis as a result of rubbing against one another. This shielding is form fitting and requires no maintanence or zip ties.

Individual Component Descriptions:

At the heart of this package is a Setrab oil cooler core in your choice of 19 row, 25 row, or 34 row sizes. The Setrab 6 series core is well known in many racing applications and features the following benefits:

Rugged Construction, designed for racing and able to withstand vibration
Light weight design
Low pressure drop across the cooler core
-10 AN braided stainless steel hoses and anodized aluminum fittings are included along with a Mocal oil cooler sandwich adapter. Cooler mounting hardware, rubber lined adel clamps, hose sleeve, and plastic ties are also included.

Core dimensions below:

19 Row (13" x 1 1/4" x 5 1/3") -- Recommended for most light street applications or applications in colder climates where less cooling is required. Will work with all aftermarket intakes.

25 Row (13" x 1 1/4" x 7 1/2") -- Recommended for more intense applications where occasional track use will be seen, also for more moderate climates. Will work with most aftermarket intakes.

34 Row (13" x 1 1/4" x 10 1/4") -- Recommended for forced induction applications, serious track applications, or in high temperature climates where extreme conditions may exist. This is our best selling cooler but it will require modifications to install with some intake systems, will not work with Stillen Gen 3 intakes without relocating cooler.

You may choose between the Standard Non-Thermostatic Mocal Sandwich Plate adapter and a Thermostatic model. It is highly recommended that a Thermostatic sandwich plate adapter be purchased when installing an oil cooler onto a street driven 370Z. As important as it is to keep high oil temperatures under control, it is just as important to maintain the proper temperature to ensure the highest possible lubrication.



https://www.z1motorsports.com/images...WebsitePic.jpg

https://www.z1motorsports.com/images...eSheathing.jpg

Oil Cooler Kits:PM for pricing


Ordering Information can be found HERE

SPOHN 06-27-2011 05:33 PM

How much for just the sheath around the lines? Would need two.

sojirovskensi 06-27-2011 07:23 PM

will 34 Row fit with AEM intake?

daisuke149 06-27-2011 07:27 PM

Quote:

Originally Posted by sojirovskensi (Post 1192884)
will 34 Row fit with AEM intake?

it will

XwChriswX 06-27-2011 07:32 PM

I can't imagine the GTM 34row kit being drastically different than the Z1 34 row kit, so I'm guessing if I get Gen III's they wont fit either?

What is required to make them fit?

daisuke149 06-27-2011 07:36 PM

they def fit with the Gen III's. and should fit with the AEM/INjens

SPOHN 07-09-2011 04:10 PM

Still haven't received a response.

Dustin@Z1 07-09-2011 04:23 PM

Sorry about that Chris! PM me your total combined line length and I can get you a price for the wrapping and heat shrink for the ends. I can sell it to you by the foot.

Dustin@Z1 07-09-2011 04:28 PM

Quote:

Originally Posted by sojirovskensi (Post 1192884)
will 34 Row fit with AEM intake?

Yes it will! The Z1 Oil Cooler Kit will fit with both the Stillen GEN III, AEM and Injen intakes with no problem whatsoever. Some minor routing experimentation is needed to properly angle the lines around the 34 Row Oil Cooler Kit (nothing more than that!)

The lines tuck away nicely and do not come close to interfering with the AEM or Injen intakes.

Dustin@Z1 07-09-2011 04:30 PM

Quote:

Originally Posted by XwChriswX (Post 1192906)
I can't imagine the GTM 34row kit being drastically different than the Z1 34 row kit, so I'm guessing if I get Gen III's they wont fit either?

What is required to make them fit?

The core itself will fit with no issues whatsoever... you will need to angle the top fittings in such a way to smoothly route the lines between the two Stillen/K&N Intake filters.

NISMO model 370Z's will require the removal of the metal air guids on top of the aluminum crash bar in order to fit both the Stillen GEN III's and 34 Row Oil Cooler Kit.

Z1motorsports 07-13-2011 04:11 PM

Kits are in stock and ready to ship!

Z1motorsports 08-04-2011 06:31 PM

Eliminate high oil temps today!

ClemsonWill 08-05-2011 02:12 PM

Any chance we can get a discount on these if a few of us order at the same time? Send me a pm if we can work something out.

Z1motorsports 10-05-2011 10:58 AM

Get those oil temps down to a manageable level.

John@Z1 10-28-2011 12:31 PM

bump.


All times are GMT -5. The time now is 07:17 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2