Sharing some more pics..
http://img.tapatalk.com/d/14/07/20/yrutazyd.jpg
http://img.tapatalk.com/d/14/07/20/3amy8u3a.jpg
http://img.tapatalk.com/d/14/07/20/7ynu4u6a.jpg
http://img.tapatalk.com/d/14/07/20/a2agyrum.jpg

Thank you for the DIY guide.

Here are my results.
Sorry for the crappy iphone picture.

http://i.imgur.com/XMzlB0F.jpg

http://i.imgur.com/9ucAgWf.jpg

Nice job man!

Nice job indeed!

Very nice job.. looks OEM..

the halo ring for the signal is 70mm? Thats the inner diameter or outer diameter?

Im trying to get rip of my landing strip LEDs and do a dual halo light.
Hope some1 can give me some info, so that i get order the right parts

Thanks

Outer diameter. You can use a 70mm but it requires a bit of cutting, I prefer 60mm with a diffuser.


Sent from my iPhone using Tapatalk

Thanks. So if using 60mm can avoid cutting the housing? And the lens still using the 2.5"?

These are the 60mm...http://tapatalk.imageshack.com/v2/14...d2a2ab230b.jpg

I had already cut for 70mm when I decided to go with the 60. If you use only the halos you may be able to get away with no cutting. Probably have to trim some with diffusers. I'm not sure though. You'll be able to tell when you mock them up.

Firstly, thanks so much to Nut_N_Much for starting this thread and to everyone else who has posted up their ideas and advice. You guys have given me the inspiration and confidence to give this a go myself.

:worship:

The main problem I have now is trying to decide what I'm going to do. The combinations seem endless!

I was all set for 2 halos, filling in the dimples and spraying the lights black. But now I've seen the latest posts about the dual colour light strips I might have to think again.

I've a couple of questions - can anyone post up some daytime pics of the strips fitted and all the lights turned off? I love the effect when they are on but would like to see how they appear with the car parked up.

Also, do they affect the blink rate? In the YouTube clip Nut_N_Much posted here the indicators seemed to flash quicker than I remember.

Thanks again all :tiphat:

Here's an idea - if you fit the dual colour strips and wire them into the turning signal then do you still need the turning signal at the top of the lights? (I guess that's down to your local laws and regulations).

Taking that further, how about making the original turning signal a parking light. That might mean you don't need to put a halo there.

Taking it further again, you could then do what you want with the original parking light (maybe a different colour LED) or just leave it blank.

Sorry - I'm getting carried away! But you see how I mean the possibilities are endless? I don't think I'm ever going to decide!

I feel stupid that this took sooooo long but I finally had a chance to get back to work on the Z. First thing I did this weekend was to hook up the controller for the demon eyes. Lots of color and flash pattern options on this. But red is my fav...

http://tapatalk.imageshack.com/v2/14...eb6e287659.jpg

wow! I guess I need to get the big boy camera out for that!!!

Thank you sir, I think this thread is full of guy's who were fed up paying crazy amount of money to have lights modded. These guy's have taken this thread to the next level. Tons of good people and advice here for any build anyone could imagine doing !!!

The turn signal was fitted with LED bulbs on mine for a short time. With out a load equalizer they flash quicker. I try to use new stuff and try to make it fail before I refer people to that product. Just the way I am.

It's an epic thread! Thanks your reply.

Has anyone any more pictures of the dual colour strips fitted? :)