https://uploads.tapatalk-cdn.com/201...69531e2b00.jpg
Managed to scoop this from Fry's Electronics. $53 17' 0 gauge and 3' negative 0 gauge.


Sent from my iPhone using Tapatalk

It also comes with zip ties, grommets, and six screws, and wire is crimed with rings.


Sent from my iPhone using Tapatalk

hell yeah man nice! get on with the install and let us know how it goes!

https://uploads.tapatalk-cdn.com/201...09b8155b81.jpg
Sorry this taking me forever. thoughts on this fab box?


Sent from my iPhone using Tapatalk

Alright! So The battery works. Everything is mounted and attached. I'm not cranking the car until Friday since it's in a storage unit 1 hour away and I'm going back to finish installing brake pads and SS lines that I am working on as well. I'll let you guys know if it cranks on Friday!


Sent from my iPhone using Tapatalk

looks good man! where did you end up securing it in your car? where the spare used to be i assume?

Yeah right on that hump lookin thing. Haha made the bracket/box out of sheet metal i bent into shape that I got from Home Depot for like ~$8


Sent from my iPhone using Tapatalk

battery + connections right atop the gas tank,,let me think on this one a minute...

So if you guys don't hear from me in about six months you'll know how I died.


Sent from my iPhone using Tapatalk

He died the same way he lived... a quarter mile at a time.
:wtf2:

Btw I forgot to mention. You can Get through to the wire boot thing on the passenger side without removing the ac blower which is a huge pia to put back. Also, didn't know this was a feature. https://uploads.tapatalk-cdn.com/201...cd968097c8.jpg
Trunk release.


Sent from my iPhone using Tapatalk

i guess da question is why. why u screwing with the corner weights of da car..

So it's been about five months since I put this battery in. I've let the car sit for four days at a time since I have a work vehicle hat I use daily. Cranks just fine every time. Encountered a water leak when I removed the boot because I broke the tabs that hold the boot in place. I used windshield urethane (I work in the autoglass industry) to stop the leak. https://uploads.tapatalk-cdn.com/201...348a82d663.jpghttps://uploads.tapatalk-cdn.com/201...2cbe701a22.jpghttps://uploads.tapatalk-cdn.com/201...f1dd6e9356.jpg


Sent from my iPhone using Tapatalk

:facepalm: Sorry to revive this old monster however I'm interested in knowing what did all of you do with the battery current sensor?

It looks like the Battery Current Sensor just monitors discharge for smart charging purposes and Battery temp.