I am about to install the GTM Stage 1 supercharger. May I ask that if you did installed the turn key version ? If you did, does the car run perfectly like stock ? with except a lot more power of course. I mean no hot or cold start issues, no bogging, no idling issue or whatever unusual ? Thank you

Greddy Oil Pan
 

Hey man,
I just bought one as well, and I am prepping to put it in next weekend.
My question is - On your last photo (the one showing the final install & is farthest away from your oil filter) I see 2 holes. Is one of those for a drain plug, and the other for the additional Temp Sensor?
Thanks

Affirmative
Those are the drain and sensor ports.

Hello. I just bought the Greddy oil pan but no hardware comes with the pan. Do I just use the stock bolts for the Greddy oil pan? I also have to install a Z1 25 Row Oil cooler w/ thermostatic sandwich plate. Will the lines hit the pan?

Did your GReddy oil pan come with the hardware as well..?

Did your GReddy oil pan come with the hardware as well..?

Did your GReddy oil pan come with the hardware as well..?

No it doesn't. He wrote on 1st page of thread. This part is considered a replacement part for the twin turbo kit From Greddy. You must source the hardware, 10mm bolts from Home Depot.

Just letting anyone who is thinking of doing this with the 2013+ sport model with the factory oil cooler, it won't fit unless you rotate the oil filter housing.

Bit of a mission but it seems alright so far. Also I had to cut both tabs off to make mine fit.

i just buy this pan

how many oil total for the motor with this add?

I'd get an extra 2 qts just in case. The pan size probably adds about 1 extra qt, but better safe than sorry. Stock engine oil refill is about 5 qts. Oil cooler adds more volume as well. You'll only need to do one oil change to find out exactly.

OK thank you!