Breadcrumbs.

great DIY
i just got an appradio 2 in but now the airbag light wont stop blinking.
i have tried the reset and got a scan but nothing works .

fyi this was my first try installing it. did i mees up the wiring or worse?
just want an idea what to look for :icon14:

Look at sticky in audio video thread

in your diy you didnt wire up the rear speakers

or ground the stereo

???

just got done with my install and boy did this diy miss a couple things

anyone installing a double din just a heads up

the unit needs to be at an angle or it will not fit

also the unit needs grounded (just use 1 of the bracket screws that you took out)

and the rear speakers do not get wired bc ther are none

Definitely agree with @madeinjapan. I installed a 2DIN Apple Carplay headunit and I ended up running the ground to the screw that secures the panel to the car that houses the Push To Start and Passenger airbag covers. My dumbass first placed it on the inside (it was only touching plastic) So I had to place it on the outside up against the bolt and have had ZERO problems since.

I am looking into getting a 2din for my ‘13. Do your steering controls all work? Do you have the Bose system? What head unit did you get?


Sent from my iPhone using Tapatalk