Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)
-   -   Does anyone know how to change the reverse light? (http://www.the370z.com/diy-section-do-yourself/13729-does-anyone-know-how-change-reverse-light.html)

JNguyen 01-26-2010 03:18 PM

Does anyone know how to change the reverse light?
 
Hey does anyone know how to change the reverse light on the 370z? I was looking yesterday for clips and etc. I found two bolts underneath the black plastic part around the taillight but is there anymore bolts? I want to make sure before I go pulling to take the taillight off

SigPapa226 01-26-2010 03:47 PM

I don't know, but there is an 09 Service Manual you can access here on the forum.

schrute 01-26-2010 03:56 PM

There's a third bolt (nut actually) on the back of the taillight that you need to remove. To get to it you have to remove a lot more plastic starting with the hatch seal. Just keep going until you see the nut on the backside of the taillight area.

AK370Z 01-26-2010 03:59 PM

Quote:

Originally Posted by schrute (Post 375405)
There's a third bolt (nut actually) on the back of the taillight that you need to remove. To get to it you have to remove a lot more plastic starting with the hatch seal. Just keep going until you see the nut on the backside of the taillight area.

thanks. I was going to refer him to your journal anyway.

OP, also check out this thread: http://www.the370z.com/diy-section-d...p-install.html . you can see some picture there.

Keep us posted how you make out. :hello:

ZKindaGuy 01-26-2010 04:46 PM

Quote:

Originally Posted by JNguyen (Post 375359)
Hey does anyone know how to change the reverse light on the 370z? I was looking yesterday for clips and etc. I found two bolts underneath the black plastic part around the taillight but is there anymore bolts? I want to make sure before I go pulling to take the taillight off

One person to hold the bulb while 25 people turn the car in place. At least that is how they do it at the dealerships so they can charge an arm and a leg....:happydance:

JNguyen 01-27-2010 03:28 PM

^ LOL

thanks for the help everyone. I will post pictures when im done


All times are GMT -5. The time now is 06:03 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2