DIY: Fix Your Hatch Lift Springs for $0.02
DIY: Fix Your Hatch Lift Springs for $0.02
Time: 1 - 2 mins Required Tools: 1) Two pennies Instructions: 1) Push your hatch release button twice. :mad: 2) Open hatch. 3) Twist the Spring and remove. http://www.the370z.com/members/g9681...ist-remove.jpg 4) Peel off the outer cover. http://www.the370z.com/members/g9681...uter-cover.jpg 5) Lay everything out. http://www.the370z.com/members/g9681...sassembled.jpg 6) Introduce the penny! http://www.the370z.com/members/g9681...roduce-fix.jpg 7) Insert penny between the two rubber peices and insert into the outer cover. http://www.the370z.com/members/g9681...ber-peices.jpg http://www.the370z.com/members/g9681...-installed.jpg 8) Reassemble the outer cover to the spring. http://www.the370z.com/members/g9681...uter-cover.jpg 9) Reinstall for a clean OEM look! http://www.the370z.com/members/g9681...d-oem-look.jpg YOU’RE DONE! :happydance: Enjoy that odd feeling of just pressing your hatch release button once. :ughdance: BTW, if that's not enough, then use a nickel. |
just note that this might not work if you have a wing
|
Quote:
|
Quote:
Quote:
|
Quote:
|
I'm surprised that no one has written up this DIY yet. I used 3 pennies on each side and it lift the hatch very nicely. You'd have to have a pretty big spoiler for it not to lift!!
|
Bump, bringing this back up to the top!!
|
All times are GMT -5. The time now is 08:29 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2