Nissan 370Z Forum - Help! Pull Engine to replace VEL ACTUATOR ASSY

Nissan 370Z Forum (http://www.the370z.com/)

- DIY Section (Do-It-Yourself) (http://www.the370z.com/diy-section-do-yourself/)

- - Help! Pull Engine to replace VEL ACTUATOR ASSY (http://www.the370z.com/diy-section-do-yourself/123240-help-pull-engine-replace-vel-actuator-assy.html)

Stino

08-15-2017 02:59 PM

Help! Pull Engine to replace VEL ACTUATOR ASSY

Can anyone tell me if I would need to pull the engine to replace the VEL Actuator Assy (part 23745+A shown below). Part and image found here. Thanks for any help!

https://www.nissanpartsdeal.com/diag...4/130_A009.png

B&W_Evader

08-17-2017 08:46 AM

I've seen pictures of the whole front end off. bumper/cowling/radiator
That opens up everything in front of the engine. Could not imagine you would need to do any more than that.

Jayhovah

08-17-2017 10:13 AM

Quote:

Originally Posted by B&W_Evader (Post 3686028)

I've seen pictures of the whole front end off. bumper/cowling/radiator
That opens up everything in front of the engine. Could not imagine you would need to do any more than that.

VVEL Actuators are on the back side of the motor, no?

B&W_Evader

08-18-2017 08:35 AM

LOL, shows you I haven't worked on them. I guess that front arrow should have clued me in.

Stino

05-18-2018 03:54 AM

My Z is fixed and running better than ever. I replaced the VEL control Module, adjusted the VEL Actuator Sensors myself with UpRev software and didn't have to part with $3200 like the Nissan dealer said I needed to.

When I took my car to Nissan and supposedly spoke to their top mechanic, he had no clue what I was talking about until I showed him in the 370Z service manual. There is absolutely no excuse for that if you are the top shop mechanic.

Do yourself a favor and read the service manual; you'll know just as much as the Nissan Dealer Mechanics.

:ughdance:

All times are GMT -5. The time now is 09:05 AM.